HP ML5590/91 manual Changing the Forms TEAR-OFF Setting, Manual Forms TEAR-OFF

CHANGING THE FORMS TEAR-OFF SETTING

The default setting for Forms Tear-Off is OFF.

1 2 3 4 5 6 7

To change the Forms Tear-Off setting:

1.Press SHIFT (2) + SEL (1).

2.Press GROUP (3) repeatedly until the Rear Feed or Bottom Feed group shows in the first column of the printed line, depending on which paper feed you are using,

3.Press ITEM (4) repeatedly until Form Tear-Off appears in the second column:

Rear Feed Form Tear-Off Off

4.Press SET (5) until the time interval you wish to select appears in the third column:

Rear Feed Form Tear-Off 1 Sec

5.Press SHIFT (2) + SEL (1) to exit Menu Mode and save the setting.

MANUAL FORMS TEAR-OFF

If you don’t wish to engage the Forms Tear-Off feature, you can advance:

lrear-feed continuous forms loaded on the built-in tractor

or

lbottom-feed continuous forms loaded on the optional push tractor

up to the tear-off position manually, by pressing TEAR (5).

USING YOUR PRINTER > 20