HP ML5590/91 manual Setting

Group	Item	Settings
Top Feed	Line Spacing	6 LPI, 8 LPI
	Form Tear-Off*	Off, 500 ms, 1 sec., 2 sec.
	Bottom Margin	Valid, Invalid
	Page Width (wide model)	8", 13.6"
	Page Length	11", 11-2/3", 12", 14", 17", 5", 3",
		3.25", 3.5", 4", 5.5", 6", 7", 8", 8.5"
	Wait Time	OFF,500 ms, 1 sec., 2 sec.
	Page Length Control	by Actual Page Length, by MENU
		Setting
	* With RollPaper Stand fitted
Set-Up	Graphics	Bi-directional, Uni-directional
	Receive Buffer Size	1 Line, 32K, 64K, 128K
	Paper Out Override	No, Yes
	Print Registration 1	0, range to 0.25 mm to the right or
		left, set in 0.05 mm increments
		Press SEL to shift registration to the
		left; press SHIFT + SEL to shift
		registration to the right.
	Print Registration 2	0, range to 0.25 mm to the right or
		left, set in 0.05 mm increments press
		SEL to shift registration to the left;
		press SHIFT + SEL to shift
		registration to the right.
	Operator Panel Function	Full Operation, Limited Operation
	Reset Inhibit	No, Yes
	Print Suppress Effective	No, Yes
	Auto LF	No, Yes
	Auto CR*	No, Yes
	CSF Bin Select**	Bin 1, Bin 2
	SI Select Pitch (10 cpi)*	15 cpi, 17.1 cpi
	SI Select Pitch (12 cpi)*	12 cpi, 20 cpi
	Time Out Print	Valid, Invalid
	Auto Select	No, Yes
	Centring Position	DEFAULT, MODE 1, MODE 2
	CSF Type**	Wide, Narrow
	Power Saving	Enable, Disable
	Power Save Time	5 min., 10 min., 15 min., 30 min., 60
		min.
	* When IBM emulation is selected.
	** When Cut Sheet Feeder is fitted

MENU MODE > 33