HP ML5590/91 manual Printer Reset, Changing Emulations

PRINTER RESET

1 2 3 4

5

Clearing some error conditions requires that you reset (reinitialise) the printer. To do this:

1.Press and release SEL (1) to take the printer off line. The SEL light goes out.

2.Press and hold SHIFT (2), then press the RESET/CHARACTER PITCH key (5).

NOTE

Pressing SHIFT and RESET reinitialises the printer, but does not affect any menu settings and does not reset the printer to the factory defaults. For information on resetting the printer to the factory defaults, see “Resetting the Menu to the Factory Defaults” later in this chapter.

EMULATIONS

lEpson® LQ — factory setting

lIBM® Proprinter

lIBM® AGM

Changing Emulations

Make sure paper is loaded.

1.Press and hold SHIFT (2), then press SEL (1).

2.Press LF (3).

The following line will print:

Printer Control Emulation Mode EPSON LQ

3.Press TEAR (4) repeatedly until the emulation you wish to select prints in the right-hand column.

USING YOUR PRINTER > 27