HP 615N manual Link-Speed LEDs, Link Troubleshooting, LED State Description

Page 23

●the printer’s control panel (if it has one). See Appendix C for more information.

●the embedded Web server running on the Jetdirect print server.

●accessing the Telnet interface on the Jetdirect print server.

●using a TFTP (Trivial File Transfer Protocol) configuration file that is downloaded, for example, from a BootP or DHCP server.

Link-Speed LEDs

The HP Jetdirect print server provides 2 light-emitting diodes (LEDs) near the RJ-45 connector. These LEDs indicate the operating link speed (10 Mbps or 100 Mbps) of the print server.

LED State	Description
Off	Not linked
On	Link established
	at indicated
	speed (10 or
	100 Mbps)
	LEDs

Link Troubleshooting

If the HP Jetdirect print server does not successfully connect to the network:

●both link speed LEDs (10 and 100) will be off

●a “LOSS OF CARRIER ERROR” will be indicated on the Jetdirect Configuration Page.

ENWW	Troubleshooting Tools 23

Image 23

Contents Hp jetdirect Setup Guide HP Jetdirect Print Servers Models 620n/615n EIO Applicable Products Table of Contents HP Jetdirect EIO Control Panel Menus HP Jetdirect Solutions SummarySpecifications and Regulatory Statements Warranty Service HP Support and ServiceHP Jetdirect EIO Print Server IntroductionTypical HP Jetdirect Print Server Installation What You Need For Help Installation Procedures Verify Printer Operation RJ-45 Remove Power to Printer, Install the HardwareVerify Jetdirect Print Server Operation Applicable HP Jetdirect Administrator’s GuideSee in this guide for link configuration Configuration Tools If Required, Configure Jetdirect With Your Network SettingsMenus Add the Printer to Your Network Server or System Adding a Printer to Your System ConfigurationMicrosoft or Novell NetWare Networks Client-Server Networks Apple Mac OS Networks Unix NetworksTo View Documents on the CD-ROM For other supported operating systems, you can 10/100Base-TX Link Configuration Troubleshooting Tools HP Jetdirect ConfigurationLED State Description Link TroubleshootingLink-Speed LEDs Parameter Expected Messages for 10/100TX Cards On Autonegotiation is enabled, orOFF Autonegotiation is disabled, 10/100TX Configuration has been manually setControlling Network Protocols Resetting to Factory DefaultsEnabling or Disabling Network Protocols Client-Server printing Peer-to-Peer printingNetwork Addresses Network ProtocolsTable A-1 Using HP Jetdirect CD-ROM Software Network System Setting Up Your Network PrinterHP-UX IPXUnix networks HP Jetdirect Printing Support HP Jetdirect Solutions Summary Tools OverviewDLC/LLC Supported Network ProtocolsTCP/IP IPX/SPXHP Jetdirect Printer Installer for Unix HP Installation SoftwareHP Internet Printer Connection HP LaserJet Utility for Mac OS Table B-3. HP Software Solutions 3 HP IP/IPX Printer GatewayHP Jetdirect EIO Control Panel Menus Introduction Classic Control Panel CFG TCP/IP= Https CFG IPX/SPX=CFG LINK= WEB=Host Name TCP/IP EnableGraphical Control Panel Dhcp Renew ConfigMethod Dhcp ReleaseManual SettingsDefault IP IPX/SPX EnableFrame Type Atalk EnableDLC/LLC Enable ResetSpeed LinkEnvironmental Specifications and Regulatory StatementsHP Jetdirect EIO Internal Print Server ElectricalJ7934A 620n J6057A 615n Regulatory StatementsElectromagnetic FCC StatementsEuropean Community Declaration of Conformity HP Jetdirect Print ServersRRL Statement Korea AustraliaCanada Vcci JapanTaiwan Class a Chinese Safety StatementHP Product Duration of Limited Warranty Warranty ServiceYour Authorized Dealer Firmware Upgrades HP Support and Service HP Support OnlineTable F-1 Support Telephone Numbers 1 HP Support By PhoneUSA Table F-1 Support Telephone Numbers 2Denmark + 45 39 29 Portugal +351 21 Finland SARHewlett-Packard Development Company, L.P