Table
Menu Item | Description | |
|
| |
CFG TCP/IP= | Selects whether you want to access the TCP/IP menu | |
| and set TCP/IP protocol parameters. | |
| NO (default): Bypass the TCP/IP menu items. | |
| YES: Access the TCP/IP menu items. | |
| TCP/IP menus depend on your print server model. | |
| ● BOOTP=YES* enables configuration by a BootP | |
| server. | |
| ● DHCP=YES* enables configuration by a DHCP | |
| server. If DHCP=YES* and the print server has | |
| acquired a DHCP lease, you can choose to configure | |
| the following DHCP settings: | |
| ■ RELEASE: Choose YES to release, or NO to save, the | |
|
| current DHCP lease. |
| ■ RENEW: Choose YES to renew the current DHCP lease, | |
|
| or NO not to renew the DHCP lease. |
| ● AUTO IP=YES* will configure a | |
| In these cases, manual configuration is turned off. | |
|
| If you specify BOOTP=NO, DHCP=NO, you can |
| choose AUTO IP=YES to have a | |
| 169.254.x.x assigned automatically. | |
| If BOOTP, DHCP and AUTO IP are disabled, you can | |
| manually set the following TCP/IP parameters from the | |
| control panel: | |
| ■ Each byte of the IP address (IP) | |
| ■ | Subnet Mask (SM) |
| ■ | Syslog Server (LG) |
| ■ | Default Gateway (GW) |
| ■ Idle Timeout period (default is 270 seconds, 0 disables | |
|
| the timeout) |
| ● (620n only) CFG DNS=YES* will allow you to | |
| specify the IP address of a DNS server, one byte at | |
| a time. | |
| Print a Jetdirect configuration page to verify your | |
| settings. However, note that the print server may | |
| overwrite selected parameters with values that ensure | |
| proper operation. | |
|
|
|
ENWW | HP Jetdirect EIO Control Panel Menus 38 |