HP 615N manual Manual, Settings, Default IP, DNS Server, IPX/SPX Enable

Table C-2. EIO Graphical Control Panel Menu (3 of 5)

Menu Item	Options	Description of settings
	MANUAL	(Available only if CONFIG METHOD is set
	SETTINGS	to MANUAL) Configure parameters
		directly from the printer control panel:
		● IP ADDRESS n.n.n.n: The unique IP
		address of the printer, where n is a
		value from 0 to 255.
		● SUBNET MASK m.m.m.m: The
		subnet mask for the printer, where m
		is a value from 0 to 255.
		● SYSLOG SERVER n.n.n.n: The IP
		address of the syslog server used to
		receive and log syslog messages.
		● DEFAULT GATEWAY n.n.n.n: The
		IP address of the gateway or router
		used for communications with other
		networks.
		● IDLE TIMEOUT: The time period, in
		seconds, after which an idle TCP print
		data connection is closed (default is
		270 seconds, 0 disables the timeout).
	DEFAULT IP	Specify the IP address to default to when
		the print server is unable to obtain an IP
		address from the network during a forced
		TCP/IP reconfiguration (for example,
		when manually configured to use BOOTP
		or DHCP).
		● AUTO IP: A link-local IP address
		169.254.x.x will be set.
		● LEGACY: The address 192.0.0.192
		will be set consistent with older
		Jetdirect products.
	DNS SERVER	(620n only) Specify the IP address
		(n.n.n.n) of the DNS Server.
IPX/SPX	ENABLE	● ON: Enable the IPX/SPX protocol.
		● OFF: Disable the IPX/SPX protocol.

ENWW HP Jetdirect EIO Control Panel Menus 42