use the fax features
7Press 
to display Redial or No Redial options.
8When the desired setting appears, press Enter to select it.
use Error Correction Mode (ECM)
ECM eliminates data lost due to poor phone lines by detecting errors that occur during transmission and automatically requesting retransmission of the erroneous portion. Phone charges are unaffected, or may even be reduced, on good phone lines. On poor phone lines, ECM increases sending time and phone charges, but sends the data much more reliably. Turn ECM off (the default setting is on) only if it increases phone charges substantially and you are willing to accept poorer quality in exchange for reduced charges.
1Press Menu.
2Press 6, then press 7.
This selects Advanced Fax Setup, then selects Error Correction Mode.
3Press 
to switch between Off and On.
4Press Enter to use the selected setting.
set automatic reduction
This setting determines what your HP OfficeJet does if it receives a fax too large for the default paper size. With this setting on (the default), the image is reduced so that it attempts to fit on one page. With this feature off, the information that will not fit on the first page is printed on a second page.
1Press Menu.
2Press 6, then press 5.
This selects Advanced Fax Setup, then selects Automatic Reduction.
3Press 
to switch between Off and On.
4Press Enter to use the selected setting.
adjust the volume
Your HP OfficeJet provides three levels for adjusting the ring and beep volume. The default setting is Soft.
1Press Menu.
2Press 7, then press 5.
This selects Maintenance, then selects the Ring and Beep Volume option.
3Press 
to select one of the options: Soft, Loud, or Off.
4 Press Enter.
reference guide | 35 |