Operating Your Air Conditioner

REMOTE CONTROL

1.ON/OFF - Press the ON/OFF button to turn the A/C on or off. When the unit is turned off, the Timer and sleep functions will be can- celled. The set temperature will be saved.

2.MODE - Press the MODE button to change the operating mode. You can choose AUTO, COOL, SAVE (energy saver), FAN only, or Dry (Dehumidifier). The temperature will not be displayed when AUTO mode is selected.

3.“—”-Press the “-” button to decrease the temperature when the unit is on. Press and hold the “-” button for more than 2 seconds to quickly cycle through the temperature op- tions. Stop pressing the button when the de- sired temperature is displayed. The tempera- ture cannot be set in auto mode. Temperature range: 61°F - 86°F.

4.“+” - Press the “+” button to increase the temperature when the unit is on. Press and hold the “+” button for more than 2 seconds to quickly cycle through the temperature op- tions. Stop pressing the button when the de- sired temperature is displayed. The tempera- ture cannot be set in auto mode. Temperature range: 61°F - 86°F.

5.FAN - Press the FAN button to turn change the FAN options. You can choose between four speeds and auto mode. The fourth fan option is only available in cooling and energy saver modes.

6.IFEEL MODE - Press the IFEEL button to change the thermostat sensor from the air conditioner to the remote location. The air con- ditioner will cool the area depending on the location and set temperature of the remote control. Take the remote control with you so the air conditioner cools the room to your loca- tion. The Remote must be in line of site of the A/C for iFeel to operate correctly.

7.SLEEP MODE - Press the SLEEP button to turn SLEEP mode on or off. SLEEP mode is set to off automatically. When SLEEP mode is selected the timer can be adjusted. SLEEP mode is not available in Fan or Auto mode. Sleep mode automatically reduces set tem- perature by 2°F after one hour and 4°F after two hours. This feature limits compressor us- age and in turn enhances energy saving while you are sleeping.

8.TIMER - Press the TIMER button when the unit is off to set up the Auto-on timer. The Auto -on time can be set between .5 - 24 hours. The icons “T-ON” and “H” will flash for 5 seconds. Start selecting the time using the “+” and “-” buttons before the icons stop flashing. The time will increase/decrease in .5 hour incre- ments with each press of the “+” or “-” buttons. To cancel the Auto-on time, manually press the ON/OFF button to turn the unit on.

Press the TIMER button when the unit is on to set up the Auto-off timer.The Auto-off time can be set between .5 - 24 hours. The icons “T- OFF” and “H” will flash for 5 seconds. Start selecting the time using the “+” and “-” buttons before the icons stop flashing. The time will increase/decrease in .5 hour increments with each press of the “+” or “-” buttons. To cancel the Auto-off time, manual press the ON/OFF button to turn the unit off.

Once the Auto-on or Auto-off time is set, the “T -On” or “T-Off” and “H” will blink for 2 seconds. After 2 seconds the set temperature will be displayed.

Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries.