HP 240A Document Size, Coord. Rotation, Gradation Mode, Auto Layout, Palette Setup, Quantity

Page 16

Document Size

Sets the Client-Created document size. Candidate values are shown below. [Auto] (default)

[Output Size]

The size is the same as that set in [Output Size].

[A0] [A1] [A2] [A3] [A4] [A5] [B0] [B1] [B2] [B3] [B4] [B5]

Note

If [Auto] is not selected, the [Auto Layout] setting switches to [Off].

If [Auto] is not selected, the [Zoom Mode] setting switches to [Output Size].

Coord. Rotation

Sets the paper orientation for printing. Candidate values are shown below. [0] (default)

Paper orientation is set as landscape. [90]

Paper orientation is set as portrait.

Gradation Mode

Sets the gradation for printing. Candidate values are shown below. [Grayscale] (default)

[Black Pen]

Auto Layout

Turns on or off the auto layout function. Candidate values are shown below. [On] (default)

[Off]

Note

[On] only appears in the display when [Auto] is selected in [Document Size].

When [Off] is selected, the [Zoom Mode] setting changes to [Output Size].

Palette Setup

Specifies the palette to be used. Candidate values are shown below. [Command] (default)

[Stored Jobs]

Quantity

„Enter Quantity

Sets the number of copies to be printed.

You can set the number in a range from 1 to 250. The default value is 1.

Important

The number of copies specified by the client is used when printing. After printing, that value can also be changed on the printer control panel. But, if the number of copies was specified from a NetWare, or LPD port, then the value set on the printer control panel cannot be changed after printing is finished.

162 HP-GL Mode Settings

Image 16
Contents DocuPrint 240A/340A HP-GL, HP-GL/2 Emulation Settings Guide Page Preface Manuals Bundled With Optional Accessories Manuals Bundled With the Machine & Their ContentsTypes of Manuals Contents Using This Guide Prerequisite KnowledgeOrganization ConventionsUsing Emulation Emulation ModeAbout Emulation Host Interfaces and EmulationSwitching Between Print Languages Mode Menu ScreenSwitching by Commands Automatic SwitchingDefault Settings When the Hard Disk Optional Is Installed in the PrinterWhen the Hard Disk Optional Is not Installed in the Printer Limits During Auto Layout MappingAbout Fonts Paper MarginUsable Fonts Font CacheEject Function To Forcibly Eject Remaining DataTo Eject All Jobs in the Printer About Mode Menu HP-GL Mode SettingsThis Printer’s Menus About Mode Menu HpglHP-GL Mode Menu Settings List of HP-GL/2 Setting ItemsFeatures Menu Paper TrayGradation Mode Palette SetupDocument Size Coord. RotationSided Print Adjust PositionOutput Tray Print Control Page Pen Attributes Stored Jobs Menu At startupRetrieve StoreSetting the HP-GL Mode Menu About the HP-GL Mode List HP-GL/2 Mode ListPrint Method Materials Related to HP-GL Mode Hard Clip AreaPrintable Area Output Sizes and Printable AreasWidth Height Bottom Long Short What Is Auto Layout? Details on Setting ItemsAuto Layout Making the Auto Layout Function EffectiveArea Determine Paper MarginZoom Mode When Zoom Mode Is Set to Output SizeWhen Zoom Mode Is Set to Coordinate Area Determining the Document SizeDetermining the Output Size When Output Size Is Set to a sizeExample When Output Size Is Set to Auto Determining the Scaling Factor Output size DocumentDegree Degrees Output Minimum value Maximum value Examples of Combinations of Functions Page Index About Yourself Customer Response SheetAbout the Guide DocuPrint 240A/340A HP-GL, HP-GL/2 Emulation Settings Guide List of Mode Menu HP-GL