HP 340A, 240A manual Materials Related to HP-GL Mode, Hard Clip Area

3 Materials Related to HP-GL Mode

3.1Hard Clip Area

In the HP-GL mode, the plottable area is determined (separately from the printable area) depending on the paper size. This area is called a hard clip area. It determines the maximum range of pen movement. Accordingly, images cannot be drawn exceeding the bounds of the hard clip area. This printer allows you to select a hard clip area from the following:

•Normal

Defines the printable area of this machine as the hard clip area.

•Output Size

Defines the output size equivalent as the hard clip area. Actually, images can be printed only within the printable area.

The hard clip area can be specified by making the HP-GL emulation mode setting or using the hard clip specification command [&I].

The following coordinate values are set when the origin is set at the lower left of the A3-size paper (Auto Layout is specified for HP-GL/2).

+Y	(16798, 11876)
	(16442, 11520)
Normal hard clip area
Output size hard clip area
Output size
(0, 0) Normal origin
(0, 0) Output size origin	+X

3.1 Hard Clip Area 25