Soleus Air KFHIP-09-OD Operation, The general procedure, Procedure for SLEEP mode

Page 10
◆Operation

Operation

The general procedure:

1.Power the unit and a buzzer will sound. Power/Run indication is red and the air conditioner is waiting to run.

(Note: Once the air conditioner plugs to power supply or receives the signal of remote control, the buzzer will send out the desirable sound.)

2.Press ON/OFF button, Power/Run indication is green and shows the running mode (Cooling, Heating, and Auto), and then the air conditioner starts running.

3.Press MODE button to select desired running mode.

4.Press SWING button to automatically swing and stop when repress it.

5.Press FAN button to set desired fan speed.

6.Press TEMP. button to set desired temperature.

Procedure for SLEEP mode:

7.Press SLEEP button to set the sleep.

8.Press TIMER button to set the present ON TIME or OFF TIME.

Note:

In AUTO mode, the unit will automatically adjust its running modes according to the room temperature changes.

- 8 -

Image 10
Contents Wall Mounted Mini Split Heat Pump Air Conditioner Indoor Unit Outdoor UnitOPERATING AND INSTALLATION MANUAL Model KFIHP-09-ID / KFHIP-09-ODTABLE OF CONTENTS Structure and Operation Name of Each PartThe Instructions before Use The Instructions before Use Set the room temperature appropriatelyKFIHP-09-ID Specification and Technical DataModel KFHHP-12-IDRemote Control Operation Function-RemotecontrolRemote Control Operation Continued How to Insert Batteries Procedure for SLEEP mode The general procedureOperation Indoor Unit InstallationInstallation Location Outdoor UnitElectric Wiring Grounding RequirementImportant Notes Installation Dimension Diagram112.6 inch 212.6 inch Install the piping hole InstallationInstall the rear panel Install the drainage hoseInstallation 6.Recover the surface panelInstall the Indoor Unit Electric wiring connection Install the Outdoor UnitInstall the connection pipe Tightening Torque TableAir Purging and Leakage Test Install the Outdoor UnitTest Operation Test Operation and Check after InstallationCheck after Installation 1.Before Test OperationCare and Maintenance Care and MaintenanceProblem Care and Maintenance ContinuedTrouble Shooting Trouble ShootingTrouble Shooting Trouble ShootingProblem Because the air of the room is cooled down rapidlyTrouble Shooting Unusual noise can be heard during operationElectrical Schematic Diagram Please Insert Diagram in hereElectrical Schematic Diagram Indoor Unit Electrical Schematic Diagram Outdoor Unit Please Insert Diagram in hereWarranty