|
|
|
|
|
|
|
| AES/EBU |
|
|
|
|
| AJA |
|
|
| |
|
|
|
|
|
|
|
| Audio | In | In | In |
| In |
| Video MonitorOut |
| ||
|
|
|
|
|
|
|
|
|
| Y/G/CVBS | Pb/B/Y | Pr/R/C | ||||||
|
|
|
|
|
|
|
|
| Out | Out | Out |
| Out |
|
|
|
|
|
Ch. 1/2 In | Ch. 3/4 In | Ch. 5/6 In | Ch. 7/8 In | Ch. 1/2 Out | Ch. 3/4 Out | Ch. 5/6 Out | Ch. 7/8 Out | Ch. 1/2 | Ch. 3/4 | Ch. 5/6 | Ch. 7/8 | SDI 1/A | SDI 2/B | Ref Loop |
|
| Ch.1(L) | Ch.2(R) |
AJA BOB (Front)
Digital outputs
to serial port 1 on Linux workstation
88192 A/D D/A CONVERTER |
| AES/EBU Digital | Inputs | Analog Inputs |
|
Input from analog source
WORD CLOCK | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | |||||
| INPUT |
| AES/EBU Digital Outputs |
|
|
| Analog Outputs |
|
|
| |||
ADAT OUT | OUTPUT | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | ||||
|
|
|
|
|
|
|
|
|
|
|
| ||
Lucid ADA 88192
Converter Digital
outputs
Output to analog destination
Alternative setup |
|
|
converted from | IN | IN IN IN |
|
| |
analog source | OUT | OUT OUT OUT |
|
VTR
Required for remote control of converter
Configuring the Lucid ADA 88192 Converter
You must manually configure the Lucid converter for either remote or local control. This section describes how to use the controls on the front of the converter to adjust settings, and lists the proper settings for remote control and for local control.
Understanding Remote vs. Local Control of the Lucid Converter
You can control the converter either remotely or locally. Remote control of the converter means that you adjust converter settings through the audio preferences of the application. If you want to control the converter