HP xw8600 manual RoHS Compliance

QuickSpecs

HP xw8600 Workstation

Technical Specifications - Monitors

NOTES

1This sleep status ignore the input sync signal check cycle when metering the model in sleep mode.

2Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour.

Longevity and Upgrading Upgradeability features contained in the product include:

One upstream and four downstream USB ports

Ergonomics	The monitor meets the ergonomic requirement of
	EN-ISO 13406-2 for flat panel displays.
Additional Information	This product is in compliance with the Restrictions
	of Hazardous Substances (RoHS) Directive,
	2002/95/EC.
	This HP product is designed to comply with the
	Waste Electrical and Electronic Equipment (WEEE)
	Directive, 2002/96/EC.
	This product is in compliance with California
	Proposition 65 (State of California; Safe Drinking
	Water and Toxic Enforcement Act of 1986).
	This product is in compliance with the IEEE 1680
	(EPEAT) standard at the SILVER level, see
	www.epeat.net.
	Plastics parts weighing over 25 grams used in the
	product are marked per ISO 11469 and
	ISO1043.
	Display meets the requirement for low frequency
	electromagnetic fields per MPR-II, TCO, and
	prEN50279 A/B/C.
	This product contains 0% recycled materials (by
	wt.)
	This product is 97.6% recycleable when properly
	disposed of at end of life.
	Packaging Materials
	Corrugated Paper 2.19 kg
	PE-LD Bags 0.09 kg
	EPS Molded Foam 1.07 kg
RoHS Compliance	Hewlett-Packard is committed to compliance with
	all applicable environmental laws and regulations,
	including the European Union Restriction of
	Hazardous Substances (RoHS) Directive. HP's goal
	is to exceed compliance obligations by meeting
	the requirements of the RoHS Directive on a
	worldwide basis. By July 1, 2006, RoHS

DA - 12849 North America — Version 9 — May 19, 2008 Page 82