QuickSpecs
HP Z400 Workstation
System Technical Specifications
System Board
System Board Form FactorATX 9.6 x 12 inches (243.84 x 304.8 mm)
Processor Socket | Single LGA1366 |
CPU Bus Speed | QPI: Up to 6.4GT/sec |
Chipset | Intel® X58 Express |
Super I/O Controller | SMSC SCH5327, Rev B |
Memory Expansion Slots4 DDR3 memory slots | |
Memory Type SupportedDDR3, UDIMM (Unbuffered), ECC | |
Memory Modes | Channel Interleaved |
Memory Speed Supported800MHz, 1066MHz and 1333MHz DDR3 | |
Memory Protection | ECC available on data, parity on address and command |
Memory |
|
Maximum Memory | NOTE: * Maximum memory capacities assume |
| Vista Business 64, XP Professional x64 Edition, Red Hat Linux |
| 32 and XP Professional |
Memory Configuration | The 4GB DIMM for Z400 and Z600 is NOT compatible with the 4GB DIMMs offered on the | |
(Supported) | Z800. |
|
| They are NOT interchangeable. |
|
| Only ECC DIMMs are supported. |
|
PCI Express Connectors1 x8 PCIe (x4) |
| |
(Gen2 Rev 0.7 connectors) |
|
|
PCI Connectors (5.0V) | 2 PCI |
|
Interfaces Supported | SATA | Integrated |
|
| 1, 5, 10 and NCQ. (Factory integrated RAID is Microsoft |
|
| Windows only) |
Serial Attached SCSI | Hardware RAID is not supported on Linux systems. The Linux kernel, with | |
| excellent functionality and performance. It is a good alternative to | |
| http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00060684/c00060684.pdf for | |
| RAID capabilities with Linux. |
|
Integrated RAID | NOTE: Requires identical hard drives (speeds, capacity, interface) | |
Integrated Graphics | No |
|
Network Controller | Integrated HP Gbit LAN by Broadcom |
|
External SATA (eSATA) | 4 ports are eSATA configurable with optional eSATA | |
IDE connector | No |
|
Floppy connector | Yes |
|
|
|
DA - 13276 Worldwide QuickSpecs — Version 1 — 3.30.2009 | Page 12 |