QuickSpecs
HP Z400 Workstation
System Technical Specifications
Power Supply | Requires T15 Torx or flat blade screwdriver |
PCI Card Retention | Yes, rear (all), middle (none), front |
Flash ROM | Yes |
Diagnostic Power SwitchYes | |
LED on board |
|
Clear Password Jumper Yes | |
Clear CMOS Button | Yes |
CMOS Battery Holder forYes | |
easy Replacement |
|
DIMM Connectors for | Yes |
easy Upgrade |
|
HP ProtectTools SecurityYes - Not supported on Microsoft XP x64 or Linux | |
Manager |
|
BIOS |
|
BIOS | Standard BIOS |
PCI 3.0 Support | Full BIOS support for PCI Express through industry standard interfaces. |
ATAPI | ATAPI Removable Media Device BIOS Specification Version 1.0. |
BBS | BIOS Boot Specification v1.01. |
WMI Support | WMI is Microsoft's implementation of |
| is fully compliant with the Distributed Management Task Force (DMTF) Common Information Model (CIM) |
| and WBEM specifications. |
BIOS Boot Spec 1.01+ Provides more control over how and from what devices the workstation will boot. | |
BIOS Power On | Users can define a specific date and time for the system to power on. |
ROM Based Computer Review and customize system configuration settings controlled by the BIOS. Setup Utility (F10)
System/Emergency ROMRecovers system BIOS in corrupted Flash ROM.
Flash Recovery with Video
Replicated Setup | Saves BIOS settings to diskette or USB flash device in human readable file. Repset.exe utility can then |
| replicate these settings on machines being deployed without entering Computer Configuration Utility (F10 |
| Setup). |
SMBIOS | System Management BIOS 2.6, for system management information. |
Boot Control | Disables the ability to boot from removable media on supported devices. |
Memory Change Alert Alerts management console if memory is removed or changed.
Thermal Alert | Monitors the temperature state within the chassis. Three modes: |
| ||
|
| NORMAL - normal temperature ranges |
| |
|
| ALERTED - excessive temperatures are detected. Raises a flag so action can be taken to avoid | ||
|
| shutdown or provide for a smoother system shutdown |
| |
|
| SHUTDOWN - excessive temperatures are encountered. Automatically shuts down the computer | ||
|
| without warning before hardware component damage occurs |
| |
Remote ROM Flash | Provides secure, |
| ||
ACPI (Advanced | Allows the system to enter and resume from low power modes (sleep states).] |
| ||
Configuration and Power | Enables an operating system to control system power consumption based on the dynamic | |||
Management Interface) | workload. |
|
| |
|
| Makes it possible to place individual cards and peripherals in a | ||
|
|
|
|
|
|
| DA - 13276 | Worldwide QuickSpecs — Version 1 — 3.30.2009 | Page 22 |