QuickSpecs

HP Z400 Workstation

System Technical Specifications

Access Panel	Tool-less
	Includes system board and memory information
Optical Drive	Tool-less
Floppy Drive	Tool-less
Hard Drives	Tool-less
Expansion Cards	Tool-less
Processor Socket	Tool-less
Green User Touch PointsYes, on tool-free internal chassis components
Color-coordinated CablesYes
and Connectors
Memory	Tool-less
System Board	Tool-less

Dual Color Power and HDYes

LED on Front of Computer

Configuration Record SWYes

Over-Temp Warning on Yes

Screen

Restore CD Set	Restores the computer to its original factory shipping image - Can be obtained via HP Support
Dual Function Front PowerYes, causes a fail-safe power off when held for 4 seconds
Switch
Padlock Support	Yes (optional): Locks side cover and secures chassis from theft
	0.22-in diameter padlock loop at rear of system
Cable Lock Support	Yes, Kensington Cable Lock (optional): Locks side cover and secures chassis from theft
	3 mm x 7 mm slot at rear of system

Universal Chassis ClampYes (optional): Locks side cover and locks cables to chassis. Secures chassis from theft and allows

Lock Support multiple units to be chained together when used with optional cable Threaded feature at rear of system

Solenoid Lock and HoodYes (optional)

SensorThe Solenoid Hood Lock eliminates the need for a physical key by making the chassis lockable through software and a password. You can also lock and unlock the chassis remotely over the network. The Sensor Kit detects when the access panel has been removed

Rear Port Control CoverYes, locks rear IO cables to prevent cable theft

Serial, Parallel, USB,	Yes, enables or disables serial, USB, audio, and network ports
Audio, Network,
Enable/Disable Port
Control
Removable Media	Yes, prevents ability to boot from removable media on supported devices (and can disable writes to
Write/Boot Control	media)
Power-On Password	Yes, prevents an unauthorized person from booting up the workstation
Setup Password	Yes, prevents an unauthorized person from changing the workstation configuration
3.3V Aux Power LED onYes
System PCA
NIC LEDs (integrated)	Yes
(Green & Amber)
CPUs and Heatsinks	A T-15 Torx or flat blade screwdriver is needed to remove the CPU heatsink before the CPU can be
	removed. CPU removal is tool-less


DA - 13276 Worldwide QuickSpecs — Version 1 — 3.30.2009	Page 20

QuickSpecs

Memory