HP Z400 manual LSISAS1064E, Internal Connectors, For ports 0-3

QuickSpecs

HP Z400 Workstation

Technical Specifications - Hard Drive Controllers

LSI 3041E 4-Port SAS 3PCI.0 Bus		PCI-Express x4 lanes
Gb/s RAID Card	PCI Modes	Bus Master DMA
	RAID Levels	RAID 0, 1, 1E and 10E
	PCI Data Burst Transfer250 MB/s per lane half duplex
	Rate	500 MB/s per lane full duplex
		1,000 MB/s 4-lane half duplex
	SAS Bandwidth	Half Duplex	Single lane – 300 MB/s
			Wide Port (2 lanes) – 600 MB/s
			Wide Port (4 lanes) – 1200 MB/s
		Full Duplex	Single SAS Lane – 600 MB/s
			Wide Port (2 lanes) –1200 MB/s
			Wide Port (4 lanes) – 2400 MB/s
	PCI Card Type	3.3 volt add-in c
	PCI Voltage	12 V ± 10%
	PCI Power	7.5 Watts
	Bracket	Full height and Low-profile
	Certification Level	PCI-Express 1.0a
	IO Bus	Four 3 Gb/s SAS/SATA ports
	SAS Processor	LSISAS1064E
	Internal Connectors	Four- SATA x1 connectors
	External Connectors	None
	Maximum Number of	122
	SCSI Devices
	LED Indicators	On-board activity and fault LEDs
	Integrated Mirroring	Integrated Mirroring option available

LSI MegaRAID® SAS

8888ELP Host Bus

Adapter (HBA)

PCI Bus	PCI-Express x8 lanes
PCI Modes	Bus Master DMA
RAID Levels	RAID 0, 1, and 5
	RAID spans 10 and 50
PCI Data Burst TransferUp to 3Gb/s per port
Rate
Full Duplex	Up to 1.5 GB/s
PCI Voltage	+3.3V Add-in Card
PCI Power	7.5 Watts
Certification Level	PCI-Express 1.0a
IO Bus	Eight 3Gb/s SAS/SATA ports
Internal Connectors	Two SAS SFF8087 x4
External Connectors	Two SAS SFF8088 x4
Maximum Number of	32
SCSI DeviceS
LED Indicators	Connector LEDs indicate whether the internal or external connector is active
	for ports 0-3 and 4-7

DA - 13276 Worldwide QuickSpecs — Version 1 — 3.30.2009 Page 32