HP Vectra VL 6 manual Complete the Questionnaire to Check Your Understanding

Page 16

Complete the Questionnaire to Check Your Understanding

Complete the Questionnaire to Check Your Understanding

Draw a circle around each letter that corresponds with a correct answer. (There may be more than one correct answer to each question).

1The following PC, supplied with a 4 GB hard disk, CD-ROM drive and audio board, has had components added by the user, and now no longer works. Which of the following could be the source of its failure to operate properly?

a An 1 GB IDE hard disk drive has been fitted in the second internal shelf, and has been connected to the spare grey IDE connector.

b A non-HP tape drive has been fitted in the lower front access shelf, and has been connected to the spare FDD connector.

c There is an HP 32 MB memory module in memory socket C1, but socket C2 is empty.

d Memory sockets B1 and B2 are empty.

e There is a pair of non-HP 4 MB memory modules in bank A.

f A non-HP network-board has been installed as a PCI accessory.

2The client wishes to accelerate the processing throughput of the PC. Which of the following options are viable:

a Replacing the current 233 MHz processor by a 266 MHz processor.

b Replacing the current processor by an overdrive processor (when available).

c Installing more level-2 cache memory modules. d Installing more main memory modules.

3Which of the following statements is correct (when installing a device in the lower 5.25-inch front-access drive shelf of the desktop model)?

a The new drive will already have the correct front bezel.

b The filler bezel on the front panel needs to be modified with a knife. c The PC is supplied with the correct replacement bezel for the drive. d A kit of bezels (PN 5064-2667) needs to be ordered from HP.

e No bezel is necessary.

14

Image 16
Contents Familiarization Guide Hewlett-Packard Company Vectra Products Comparison Manually switched 115/230 VACVolt Voltage Regulator Module New Package for the Desktop Models Rear viewMinitower Package System Board and Backplanes Desktop rear view Desktop front viewMinitower top view Removing the Power Supply Installing Accessories in the New Desktop PackageRemoving the Cover Installing an Accessory Board Installing a Hard Disk Drive in the Top Rear Shelf Installing a Hard Disk Drive in the Bottom Rear ShelfInstalling a CD-ROM Drive or Zip Drive in a Front Shelf Unit forward about half wayReplacing the Pentium II Processor Replacing the System Board Accessories that are Supplied with the PC Matrox Millennium Graphics Controller BoardFlashing the Latest Version of the System Bios Access HP World Wide Web SiteComplete the Questionnaire to Check Your Understanding New drive will already have the correct front bezelComplete the Questionnaire to Check Your Understanding Answers and Explanations Answers and Explanations 50%