QuickSpecs
HP Compaq 8000 Elite PC
Technical Specifications
models use ACPI to provide power conservation features.
S5 Max Power Savings setting supports EU Lot6 requirement and allows the computer to power down below 1W is S5 (when turned off). When S5 Max Power Savings feature is enabled power to slots is turned off along with WOL functionality.
Other Features
Advanced Configuration and Power Management Interface (ACPI). Allows the system to wake from a low power mode. Controls system power consumption, making it possible to place individual cards and peripherals in a low- power or
System Management BIOS v2.6
Intel Wired for Management support; industry wide initiative to make Intel architecture based PCs, servers and mobile computers more inherently manageable
Dual State Power Button; acts as both an on/off button and a
Serviceability Features
Dual colored power LED on front of computer to indicate either normal or fault condition Diagnostic LED Explanation Table:
Number of
3 – processor not installed
4 – power supply failure
5 – memory error
6 – video error
7 – PCA failure (ROM detected failure prior to video)
8 – invalid ROM, bootblock recovery mode
9 – system not fetching code
10 – system hang while loading an option ROM System/Emergency ROM
Flash ROM
CMOS Battery Holder for easy replacement
Flash Recovery with Video Configuration Record Software 5 Aux Power LED on System PCA
Processor ZIF Socket for easy Upgrade
DIMM Connectors for easy Upgrade Clear CMOS Button
NIC LEDs (integrated) (Green & Amber)
Dual Color Power and HD LED – To Indicate Normal Operations and Fault Conditions Color coordinated cables and connectors
System memory can be upgraded without removing the system board or any internal components
Green Pull Tabs, and Quick Release Latches for easy Identification
NOTE: thumb screw release mechanism is used with the
Additional Features | Description |
Intel Standard Manageability | Includes the following: |
NOTES: | Basic PC management capabilities such as asset inventory, HW alerting, |
Requires the utilization of the | |
| |
integrated network connection |
|
|
|
|
DA - 13424 | Worldwide QuickSpecs — Version 17 — 6/25/2010 | Page 21 |