QuickSpecs
HP Compaq 8000 Elite PC
Technical Specifications - Hard Drives
10,000 RPM Serial ATA 160 GB | Capacity | 160,041,885,696 bytes |
| |
Hard Drives |
| Height | 1 in (2.54 cm) |
|
|
| Width | Media diameter: 3.0 in (7.62 cm) | |
|
|
| Physical size: 4 in (10.2 cm) | |
|
| Interface | Serial ATA (1.5 Gb/s), Native Command Queuing | |
|
|
| enabled |
|
|
| Synchronous Transfer | Up to 3.0 Gb/s |
|
|
| Rate (Maximum) |
|
|
|
| Cache | 16 Mbytes |
|
|
| Seek Time (typical | Single Track | 0.3 ms |
|
| reads, includes | Average | 4.6 ms |
|
| controller overhead, | ||
|
| 10.2 ms | ||
|
| including settling) | ||
|
| Rotational Speed | 10,000 rpm |
|
|
| Logical Blocks | 312,581,808 |
|
|
| Operating | 41° to 131° F (5° to 55° C) | |
|
| Temperature |
|
|
|
|
|
|
|
Solid State Drive | 64 GB | Capacity | 64 GB |
|
|
| NAND Flash Memory | Multi Level Cell (MLC) with wear leveling controller | |
|
| Interface type | SATA 3Gb/sec |
|
|
|
| 2.74 x 0.37 x 4 in (6.98 x 0.95 x 10.2 cm) | |
|
| (W x H x D) |
|
|
|
| Weight | 0.14 lb (65 g) |
|
|
| Internal transfer rate | Write speed | Up to 220 MB/s |
|
|
| Read speed | Up to 120 MB/s |
|
| Host transfer rate | Ultra DMA mode | Up to 150 MB/s |
|
| Power | DC power requirement 5 VDC | |
|
|
|
| p |
|
|
| Total power | <1.12Watt |
|
|
| consumption |
|
|
| Environmental | Temperature | 32° to 158° F (0° to 70° C) |
|
| (all conditions, non- | (operating) |
|
|
| condensing) | Relative Humidity | 5% to 95% |
|
|
| (operating) |
|
|
|
| Maximum Wet Bulb | 84° F (29° C) |
|
|
| Temperature |
|
|
|
| (operating) |
|
|
| Regulations | UL, CSA, EN | |
|
|
| CNS 13438, AS/NZS CISPR 22:2002 Class B, R1113 | |
|
|
| and C1172 Class B |
|
NOTE: For solid state disk drives, GB means 1 billion bytes. 16GB is the unformatted capacity of this drive before a portion of the drive is reserved for flash management features. Actual capacity varies by content and will be less than 15.8GB.
DA - 13424 Worldwide QuickSpecs — Version 17 — 6/25/2010 | Page 44 |