QuickSpecs
HP dx5150 Business PC
Technical Specifications - Optical Storage
Access Times
(typical reads, including settling)
Maximum Data Transfer Rates
Data Transfer Modes
Power
< 120 ms | |
< 90 ms | |
Full Stroke DVD | < 240 ms (seek) |
Full Stroke CD | < 160 ms (seek) |
6000 KB/s (40X) Max | |
21,600 KB/s (16X) Max |
PIO Mode 4 (16.6 MB/s);
Source | |
DC Power Requirement | 5 VDC ± 5% – 100 mV ripple |
| 12 VDC ± 5% – 200 mV ripple |
DC Current | 5 VDC – <800 mA typical, < 1000 mA |
| maximum |
| 12 VDC – < 870 mA typical |
Audio Output Level | 0.7 Vrms (typical) |
| |
Configuration Jumper | Master, slave, and cable select modes | ||
Block |
|
| |
Data Interface Connector | |||
Environmental | Temperature (operating) | 41° to 122° F (5° to 50° C) | |
(all conditions non- | Relative Humidity | 10% to 85% | |
condensing) | |||
(operating) |
| ||
|
| ||
| Maximum Wet Bulb | 86° F (30° C) | |
| Temperature (operating) |
| |
Certifications, Approvals | MMC II support, | ||
| AS/NZS 3548 class B, CNS 13438, C.I.S.P.R. Pub 22, TUV or VDE | ||
| EN60950, EN 55022, EN55024, SEMKO, NEMKO, DEMKO, FIMKO, EN | ||
| |||
|
|
| |
16X DVD+/-RW
LightScribe Drive (Double
Layer / Dual Format)
Height | |
Orientation | Either horizontal or vertical |
Interface type | ATAPI/EIDE |
Disc recording capacity | 8.5 GB DL or 4.7 GB standard |
Dimensions (W x H x D) 5.9 x 1.7 x 8.0 in (15.0 x 4.4 x 20.3 cm)
Weight (max) | 2.6 lb (1.2 kg) |
|
Write speed | DVD+R | Up to 16X |
| DVD+RW | Up to 4X |
| DVD+R DL | Up to 2.4X |
| Up to 8X | |
| Up to 4X | |
| Up to 40X | |
| Up to 24X |
DA - 12105 Worldwide — Version 7 — August 23, 2005 | Page 39 |