HP tm2-1073nr, tm2-1070us, tm2-1079cl, tm2-1072nr, tm2-1020tx Packaging and transporting guidelines

Page 42

Packaging and transporting guidelines

Follow these grounding guidelines when packaging and transporting equipment:

To avoid hand contact, transport products in static-safe tubes, bags, or boxes.

Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.

Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.

Place items on a grounded surface before removing items from their containers.

Always be properly grounded when touching a component or assembly.

Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam.

Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized equipment used for moving materials is wired to ground and that proper materials are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges.

Workstation guidelines

Follow these grounding workstation guidelines:

Cover the workstation with approved static-shielding material.

Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment.

Use conductive field service tools, such as cutters, screwdrivers, and vacuums.

When fixtures must directly contact dissipative surfaces, use fixtures made only of static- safe materials.

Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam.

Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items only at static-free workstations.

Avoid contact with pins, leads, or circuitry.

Turn off power and input signals before inserting or removing connectors or test equipment.

34 Chapter 4 Removal and replacement procedures

ENWW

Image 42
Contents HP TouchSmart tm2 Notebook PC Page Safety warning notice Iv Safety warning notice Table of contents Computer specifications Inch display specifications 105 Viii Graphics Product descriptionChipset PanelsCategory Description WirelessModule includes two 2.4-GHz antennae in display assembly Hard drivesOperating system Preinstalled Module includes two antennae in display assemblyPower requirements Serviceability End-user replaceable partsHard drive Display components External component identificationTop components Component FunctionKeys Fn keyLights Component DescriptionTouchPad components Front components Left-side componentsRear components Control Panel System and Security Power Right-side componentsOptions Enww Bottom components Enww Service tag Illustrated parts catalogIllustrated parts catalog Computer major components Display assembly Display Screw Kit not illustratedFan Power connector and cableUSB/Card Reader board Memory modules PC3, 1066-MHzDescription Spare part number Wlan moduleCell, 62-Wh, 2.8-Ah, Li-ion battery Hspa EV-DO Wwan modulePlastics Kit Mass storage devices Miscellaneous parts Sequential part number listing Spare part Description NumberZambia, and Zimbabwe Antenna cables Enww 598859-001 MB memory module PC3, 1066-MHz 599092-001 Enww Service considerations Removal and replacement proceduresPreliminary replacement requirements Tools requiredCables and connectors Grounding guidelines Typical electrostatic voltage levelsEvent 10% 40% 55% Packaging and transporting guidelines Equipment guidelines Material Use Voltage protection levelComponent replacement procedures Service tagComponent replacement procedures Computer feet Battery Pen Description Spare part number Pen 593028-001Hard drive Enww Enww Wwan module Enww Enww Memory module Enww Enww Wlan module Enww Enww Enww RTC battery Top cover Enww Keyboard Country or region Spare part numberEnww Pen holder and eject assembly Bluetooth module Description Spare part number Bluetooth module 537921-001Power switch board Display assembly Enww Enww Enww Enww System board FSB, 3-MB L2 cache, 10-WEnww Enww Enww Power connector and cable Fan Description Spare part number Fan 592970-001Remove the fan Reverse this procedure to install the fan Heat sink Enww Enww Reverse this procedure to install the heat sink USB/Card Reader board Setup Utility Bios Starting Setup UtilityUsing Setup Utility Changing the language of Setup UtilityNavigating and selecting in Setup Utility Restoring default settings in Setup Utility Display system informationMain menu Setup Utility menusExiting Setup Utility Security menuSystem Configuration menu Diagnostics menuUpdating the Bios Determining the BiosDownloading a Bios update Updating the Bios Enww Specifications Computer specificationsInch display specifications Hard drive specifications Access time Applicable disc Read WriteCache buffer Data transfer rate CD-DA, CD+EG, CD-MIDI, CD Enww Backup and recovery Backup and recovery Backing up your information Using Windows Backup and Restore Using system restore pointsPerforming a recovery Recovering from the recovery discsSelect Start All Programs Recovery Manager Recovery Manager Audio-in microphone Connector pin assignmentsPin Signal Audio-out headphoneExternal monitor Hdmi RJ-45 network Universal Serial BusPower cord set requirements Requirements for all countriesRequirements for specific countries and regions Country/region Accredited agency Applicable note numberBattery RecyclingDisplay Enww Display Enww Enww Enww Index Hdmi Enww Enww
Related manuals
Manual 8 pages 26.72 Kb Manual 129 pages 48.14 Kb