Display assembly
Description | Spare part number |
|
|
fingerprint reader, WLAN antenna cables, and WWAN antenna cables |
|
|
|
fingerprint reader, and WLAN antenna cables |
|
|
|
WLAN antenna cables, and WWAN antenna cables |
|
|
|
WLAN antenna cables |
|
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power cord.
4.Remove the battery (see Battery on page 39).
5.Disconnect the WWAN antenna cables from the WWAN module (see WWAN module on page 44).
6.Disconnect the WLAN antenna cables from the WLAN module (see WLAN module on page 50).
7.Remove the hard drive (see Hard drive on page 41).
8.Remove the top cover (see Top cover on page 55).
Remove the display assembly:
1.Close the computer and turn it upside down, with the rear panel toward you.
62 Chapter 4 Removal and replacement procedures | ENWW |