Sterling STT 160 manual STT 110 / STT For your safety, General

Page 12

STT 110 / STT 160

2.1. For your safety

General

The operating personnel of this equipment must be at least 16 years old.

Please read these operating instructions carefully before taking into operation for the first time. Contact us should questions arise. This avoids injury and damage to equipment!

These operating instructions must be kept available at all times at the place of operation of the equipment. Improper operation results in danger of accidents!

Please note that, for reasons of clarity, not all conceivable cases regarding operation or mainten- ance of the equipment can be covered in these operating instructions.

Please observe all safety instructions and warnings on the equipment. This avoids injury and da- mage to equipment!

All work on the equipment is to be carried out by persons whose qualifications are specified in the pertaining chapters of the operating instructions. Improper operation results in danger of acci- dents!

The proper working clothes are to be worn during any work on the equipment. This avoids injury!

The local regulations and requirements pertaining to this equipment must be observed.

Disconnect electrical components from the mains supply before work is carried out on these com- ponents Caution: Danger to life through electrical shock!

Compile detailed operating instructions based on these Operating instructions for the sequence of procedures to be carried out on this equipment. Improper operation results in danger of acci- dents!

Observe that the control system is still under voltage even when the main switch is switched off. Caution: Danger to life through electrical shock!

SM2-605

Safety instructions 2-2

Image 12
Contents Operating Instructions Dehumidified air dryer STT Sterling Material ProcessingParts and Service Department STT 110 / STT Sterling Material Processing Edition 04/02STT 110 / STT Table of contents Transport, Assembly and Storage Assembly instructionsTechnical Data Spare parts list Electrical manualGeneral Information General InformationSTT 110 / STT STT 110 / STT CTT 110 / CTT Explanations and information Legal basisFields of applications Safety instructions Safety instructionsSTT 110 / STT For your safety GeneralAssembly OperationMaintenance STT 110 / STT For the safety of the devices Start up Start upSwitching on the Dryer For operation with timer clock optionalFor operation without timer clock STT 110 / STT Initial OperationExit Switching the Dryer on STT 110 / STT Continuous OperationSTT 110 / STT Setting the Drying Temperature Exit Optimizing the thermo regulatorSTT 110 / STT Switching the Dryer off Error and error correction Error and error correctionFollowing errors can lead to an alarm Blower Regeneration heaterHopper heater Maintenance MaintenanceSTT 110 / STT STT 110 / STT Maintenance schedule STT 110 / STT Cleaning or Replacing the Air Filter STT 110 / STT Cleaning or Replacing the Return Air Filter STT 110 / STTSTT 110 / STT Disposing of Drying Agents STT 110 / STT Cleaning the Drying Hopper STT 110 / STT ST 60 ST Functional description Functional descriptionSTT 110 / STT General Information STT 110 / STT STT 110 / STT STT 110 / STT Drying Hopper Optional 180 STT 110 / STT Hopper HeaterReturn Air Cooler Optional Transport, Assembly and Storage Transport, Assembly and StorageSTT 110 / STT Tansport and Packing STT 110 / STT Assembly StorageAssembly instructions Assembly instructionsGrounding the equipment against electrostatic charging STT 110 / STT Electrical Connection STT 110 / STT Connection of Return Air Cooler Optional Technical Data Technical DataSTT Return Air CoolerSTT 110 / STT STT 110 / STT Dimension Sheet Spare parts list Spare parts listSTT 110 / STT Pos ID-number DescriptionReturn air cooler optional Operating unit Pos ID-number Description Control unit Electrical manual Electrical manualAccessories AccessoriesBasic setting thermo regulator CodeParameter Parameter set
Related manuals
Manual 57 pages 29.35 Kb