Sterling STT 160 manual 180, STT 110 / STT Hopper Heater

STT 110 / STT 160

6.2.1. Hopper Heater

Each drying hopper has its own hopper heater. The temperature of the dehumidified air is adjus- ted by means of the thermo regulator. The setting range is from +60 - +180 °C. The current tempe- rature can be read off the digital display (= actual value).

F

The thermo regulator is factory-programmed. Nevertheless, you have to set specific values which are dependent on the processed material.

Process display		60
drying temperature
Setpoint display
	180		K1 K2
drying temperature
			K3
“PGM” key,
Selecting operating level	PGM		EXIT	“EXIT” key,
or parameter selection				Aborting the input
reducing setpoint value		increasing setpoint value

Thermo regulator

SM2-605

Functional description 6-6