Solid-state drive
Description | Spare part number |
|
|
|
|
|
|
|
|
Before removing the
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the bottom cover (see Bottom cover on page 33).
5.Disconnect the battery cable from the system board (see Battery on page 35).
Remove the
1.Remove the two Phillips PM2.0×4.5 screws (1) that secure the
2.Remove the
Reverse this procedure to install the
40 | Chapter 4 Removal and replacement procedures |