4.Remove the two Phillips PM2.0×3.0 screws (1) and the five Phillips PM1.5×2.0 screws (2) that secure the keyboard to the top cover.
5.Remove the keyboard (3).
Reverse this procedure to install the keyboard.
Rear speakers
Description | Spare part number |
|
|
Rear speakers (includes left and right rear speakers, cables, and 2 rubber isolators) | |
|
|
Before removing the rear speakers, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the bottom cover (see Bottom cover on page 33), and then remove the following components:
a.Battery (see Battery on page 35)
b.Fan (see Fan on page 39)
c.System board (see System board on page 62)
Component replacement procedures | 71 |