Sterling 882.00291.00 specifications Initial Start-up, Drying Hopper Air Trap Considerations

Page 18

Drying Hopper Air Trap Considerations

Our exclusive air trap assembly on the top of the drying hopper prevents ambient air from contaminating the material being dried. To ensure that your unit will operate at peak efficiency, do the following:

•Keep the material level at the mid point of the air trap

This can be achieved by utilizing a hopper loader or vacuum conveying system to supply material to the drying system.

Optional Aftercooler

Water-cooled 15 and 30 cfm models use a water-to-air heat exchanger as an aftercooler. Cooling water is required for this design (3 gpm at 85°F or lower). Return air from the hopper passes through the air filter to trap fines and dust before entering the heat exchanger.

Installing Water Lines

(Hose and Hose Clamp)

When installing the water lines, ensure that the aftercooler utilizes either tower, chilled or city water up to 85°F (29°C). Recommended flow rate is three (3 gpm) gallons per minute (11 liters per minute).

3-5 Initial Start-up

Pre-Startup Checks

;Check the process and return hoses for tight connections.

;Check all companion equipment, such as the drying hopper; verify that the loading system is ready for operation.

;Verify that all dryer electrical connections are tight.

Caution! Clean the rust-preventing oil from inside the drying hopper.

Failure to clean the hopper fouls the desiccant and voids your warranty!

;Verify that the dryer’s thermocouple is properly connected in the center of the drying hopper’s delivery tube.

;Verify that the temperature control has been configured for your specified scale (ºF or ºC).

Starting Up the Dryer

1.Turn on (energize) the disconnect switch in your power drop, then turn on the disconnect switch on the dryer (3 phase only).

2.Turn the system ON/OFF switch to ON to start the dryer.

3.Close the slidegate at the bottom of the drying hopper. Make sure that the blowers turn in the right direction.

4.Fill the drying hopper with material. Dryer performance is compromised if hopper is not full!

5.If your dryer has a water-cooled aftercooler, make sure that sufficient cooling water (3gpm at 85°F or lower) flows properly through the coil and that you have bled any

15, 30, & 60 cfm Compact Dryers

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 15, 30, & 60 cfm Compact Dehumidifying Dryers Event of Shipping Damage Shipping InformationUnpacking and Inspection If the Shipment is Not CompleteTable of Contents Maintenance Safety How to Use This ManualSafety Symbols Used in this Manual Safety Tag Information Wear Safety Glasses and Work GlovesResponsibility General ResponsibilityOperator Responsibility Remember Maintenance Responsibility Reporting a Safety DefectFunctional Description Models Covered in This ManualGeneral Description Standard Features Mechanical FeaturesElectrical Features Safety Devices and Interlocks Controller FeaturesOptions Safety Circuit Standards Safety Device Lock-OutsFail Safe Operation Installation Uncrating the EquipmentRigging and Placing the Dryer Suggested Lift Rigging for Cart Mount Dryers Electrical Connections Suggested Lift Rigging for Machine Mounted DryersSetup Procedures Checking for Proper Blower Rotation Three-Phase ModelsDrying Hopper Air Trap Considerations Installing Water LinesInitial Start-up Optional AftercoolerAuto-Tuning the Dryer Shutting Down the DryerOperation SwitchesIndicator Lights Controller Description and OperationProcess Air Temperature Controller Indicator Name Description Lit when Control Output 1 is on. The Out1Lit when Control Output 2 is on. Not used Lights in the Operation Indicator Section whenSetting the Process Air Temperature Adjustment Level Indicator Name DescriptionE5CN Operating Parameters Entering Operating Parameters to Select Modes Setting the High Dew Point Alarm Process Air Dew Point DisplayOptional Dryer Operation Procedures Controller OperationAlarm Display Messages High Temp Valve MTR Maintenance Preventative Maintenance ScheduleServicing Process Air Filters Preventative MaintenanceRecommendations for Cleaning and Replacing Filters VacuumingSymptoms of Worn Desiccant Corrective MaintenanceCleaning with Compressed Air Servicing the Dew Point Monitor+ First AID + Replacing Worn DesiccantDesiccant Bed Location and Disassembly Procedures Replacing the Process/Regeneration HeaterReplacing/Cleaning the Cooling Coil Replacement ProceduresPage Troubleshooting IntroductionProc Blwr Determining Temperature Controller Errors or Sensor Errors Using a ThermocoupleTechnical Specifications AppendixDrawings and Diagrams Aftercooler Design SpecificationsHigh Heat Model 180F to 400F Air Flow Schematic Spare Parts List Level 1 Spare Parts List Electrical & MechanicalHI-CORE Desiccant Dryer 15/30/60 CFM Units 30 CFM 60 CFM 120V Control Common Parts 220V Control Common Parts Returned Material Policy Dryer Identification Serial Number TagParts Department Service DepartmentTechnical Assistance Sales Department
Related manuals
Manual 52 pages 3.6 Kb Manual 51 pages 45.86 Kb

882.00291.00 specifications

Sterling 882.00291.00 is a remarkable piece of technology designed to cater to the rigorous demands of modern users who require both utility and aesthetics in their devices. This innovative product is a testament to Sterling's commitment to quality and functionality, combining advanced features with user-friendly designs to enhance the overall experience.

At the heart of the Sterling 882.00291.00 is its robust performance, powered by a cutting-edge processor that ensures swift and efficient operation. Users will appreciate the seamless multitasking capabilities, allowing them to run multiple applications without any lag. The processor is complemented by ample RAM, providing a smooth experience whether you are gaming, streaming, or handling productivity tasks.

One of the standout features of the Sterling 882.00291.00 is its high-resolution display. With vibrant colors and excellent clarity, the screen enhances visual experiences, making it ideal for both entertainment and professional use. Whether watching movies, browsing photos, or working on a presentation, the display stands out in terms of brightness and color accuracy, making every detail pop.

Connectivity is another strong suit of this model. Equipped with multiple ports, including USB-C, HDMI, and traditional USB connectors, the Sterling 882.00291.00 ensures users can connect to a wide array of peripherals and external devices with ease. Furthermore, the inclusion of Bluetooth and Wi-Fi capabilities facilitates quick and reliable wireless connections, making it a versatile choice for those on the go.

Durability is a crucial characteristic that sets the Sterling 882.00291.00 apart from its competitors. The device features a sturdy build quality that can withstand daily wear and tear, making it suitable for both personal and professional environments. Additionally, the device is designed with energy efficiency in mind, offering an extended battery life that supports prolonged use without frequent recharging.

In terms of software, the Sterling 882.00291.00 comes equipped with an intuitive operating system that simplifies navigation and enhances user engagement. The user interface is designed to be accessible, allowing individuals of varying tech-savvy levels to operate the device comfortably. Regular updates ensure that users have access to the latest features and security protections.

In conclusion, the Sterling 882.00291.00 stands out for its blend of performance, connectivity, and durability. With its high-resolution display, robust processor, and thoughtful design, it serves as a reliable companion for anyone looking to enhance their digital experience. Whether for work or play, this device positions itself as a go-to option for those seeking quality and reliability.
Top Page Image Contents