Sterling 882.00291.00 Setting the Process Air Temperature, E5CN Operating Parameters

Page 23

Setting the Process Air Temperature

When setting the process air temperature, consult with the resin manufacture for the recommended drying temperature.

To change the process air temperature set point with the dryer running:

•Press to raise the set point to the temperature you want.

•Press to lower the set point to the temperature you want.

Restoring the Process Air Temperature Controller (E5CN) to Factory Settings

If the preset parameters on the controller have been tampered with and it no longer properly controls temperature, you can restore the controllers to the factory setup. Call the Service

Department for detailed instructions.

E5CN Operating Parameters

The E5CN controller has several mode selections. Within each mode are numerous parameters that can be set.

The factory has set the security level to protect the critical parameters from being accidentally changed. Below is an explanation of the operating modes you will have access to and on the following page are the manufacturers’ default settings.

Available E5CN Modes

Operation Level

 

Indicator

 

Name

Description

 

 

 

 

 

 

 

 

Run/Stop Mode

When “RUN” is selected, the control is running.

 

 

 

(r-S)

When “STOP” is selected, the control is stopped.

 

 

 

 

When the control is stopped, the STOP display

 

 

 

 

lights. The default is set to “RUN.”

 

 

 

 

 

 

 

 

Alarm Value 1

This setting is used to indicate how many degrees

 

 

 

Mode (AL-1)

the process temperature will be allowed to exceed

 

 

 

(35°F)

the set point temperature. An alarm output will de-

 

 

 

energize the heaters and blower.

 

 

 

 

 

 

 

 

 

 

Adjustment Level

 

 

 

 

 

 

 

Indicator

 

Name

Description

 

 

 

 

 

 

 

 

Auto-Tune Mode

See Page 19 of Chapter 3 for instructions on how

 

 

 

(At)

to Auto-Tune your dryer.

 

 

 

 

Note: Although the controller is calibrated at

 

 

 

 

the factory, the manufacturer

 

 

 

 

recommends that the unit be Auto-

 

 

 

 

Tuned prior to dryer startup.

 

 

 

 

 

 

 

 

Temperature Input

This setting is used to offset an error between the

 

 

 

Shift Mode (TnS)

set point and the actual temperature. The entire

 

 

 

 

input range is shifted by a set figure

15, 30, & 60 cfm Compact Dryers

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 15, 30, & 60 cfm Compact Dehumidifying Dryers If the Shipment is Not Complete Shipping InformationUnpacking and Inspection Event of Shipping DamageTable of Contents Maintenance Safety Symbols Used in this Manual SafetyHow to Use This Manual Wear Safety Glasses and Work Gloves Safety Tag InformationOperator Responsibility ResponsibilityGeneral Responsibility Remember Reporting a Safety Defect Maintenance ResponsibilityGeneral Description Functional DescriptionModels Covered in This Manual Electrical Features Standard FeaturesMechanical Features Options Safety Devices and InterlocksController Features Fail Safe Operation Safety Circuit StandardsSafety Device Lock-Outs Rigging and Placing the Dryer InstallationUncrating the Equipment Suggested Lift Rigging for Cart Mount Dryers Suggested Lift Rigging for Machine Mounted Dryers Electrical ConnectionsChecking for Proper Blower Rotation Three-Phase Models Setup ProceduresOptional Aftercooler Installing Water LinesInitial Start-up Drying Hopper Air Trap ConsiderationsShutting Down the Dryer Auto-Tuning the DryerController Description and Operation SwitchesIndicator Lights OperationProcess Air Temperature Controller Lights in the Operation Indicator Section when Lit when Control Output 1 is on. The Out1Lit when Control Output 2 is on. Not used Indicator Name DescriptionE5CN Operating Parameters Setting the Process Air TemperatureAdjustment Level Indicator Name Description Entering Operating Parameters to Select Modes Optional Setting the High Dew Point AlarmProcess Air Dew Point Display Controller Operation Dryer Operation ProceduresAlarm Display Messages High Temp Valve MTR Preventative Maintenance Schedule MaintenanceVacuuming Preventative MaintenanceRecommendations for Cleaning and Replacing Filters Servicing Process Air FiltersServicing the Dew Point Monitor Corrective MaintenanceCleaning with Compressed Air Symptoms of Worn DesiccantReplacing Worn Desiccant + First AID +Desiccant Bed Location and Disassembly Replacing the Process/Regeneration Heater ProceduresReplacement Procedures Replacing/Cleaning the Cooling CoilPage Introduction TroubleshootingProc Blwr Using a Thermocouple Determining Temperature Controller Errors or Sensor ErrorsAppendix Technical SpecificationsAftercooler Design Specifications Drawings and DiagramsHigh Heat Model 180F to 400F Air Flow Schematic Level 1 Spare Parts List Electrical & Mechanical Spare Parts ListHI-CORE Desiccant Dryer 15/30/60 CFM Units 30 CFM 60 CFM 120V Control Common Parts 220V Control Common Parts Dryer Identification Serial Number Tag Returned Material PolicySales Department Service DepartmentTechnical Assistance Parts Department
Related manuals
Manual 52 pages 3.6 Kb Manual 51 pages 45.86 Kb

882.00291.00 specifications

Sterling 882.00291.00 is a remarkable piece of technology designed to cater to the rigorous demands of modern users who require both utility and aesthetics in their devices. This innovative product is a testament to Sterling's commitment to quality and functionality, combining advanced features with user-friendly designs to enhance the overall experience.

At the heart of the Sterling 882.00291.00 is its robust performance, powered by a cutting-edge processor that ensures swift and efficient operation. Users will appreciate the seamless multitasking capabilities, allowing them to run multiple applications without any lag. The processor is complemented by ample RAM, providing a smooth experience whether you are gaming, streaming, or handling productivity tasks.

One of the standout features of the Sterling 882.00291.00 is its high-resolution display. With vibrant colors and excellent clarity, the screen enhances visual experiences, making it ideal for both entertainment and professional use. Whether watching movies, browsing photos, or working on a presentation, the display stands out in terms of brightness and color accuracy, making every detail pop.

Connectivity is another strong suit of this model. Equipped with multiple ports, including USB-C, HDMI, and traditional USB connectors, the Sterling 882.00291.00 ensures users can connect to a wide array of peripherals and external devices with ease. Furthermore, the inclusion of Bluetooth and Wi-Fi capabilities facilitates quick and reliable wireless connections, making it a versatile choice for those on the go.

Durability is a crucial characteristic that sets the Sterling 882.00291.00 apart from its competitors. The device features a sturdy build quality that can withstand daily wear and tear, making it suitable for both personal and professional environments. Additionally, the device is designed with energy efficiency in mind, offering an extended battery life that supports prolonged use without frequent recharging.

In terms of software, the Sterling 882.00291.00 comes equipped with an intuitive operating system that simplifies navigation and enhances user engagement. The user interface is designed to be accessible, allowing individuals of varying tech-savvy levels to operate the device comfortably. Regular updates ensure that users have access to the latest features and security protections.

In conclusion, the Sterling 882.00291.00 stands out for its blend of performance, connectivity, and durability. With its high-resolution display, robust processor, and thoughtful design, it serves as a reliable companion for anyone looking to enhance their digital experience. Whether for work or play, this device positions itself as a go-to option for those seeking quality and reliability.
Top Page Image Contents