|
| Removal and replacement procedures |
RTC battery |
| |
|
|
|
| Description | Spare part number |
|
|
|
| RTC battery (includes cable and | |
|
|
|
Before removing the RTC battery, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page 7).
5.Remove the wireless module compartment cover (see “WLAN module” on page 12).
Remove the RTC battery:
1.Disconnect the RTC battery cable 1 from the system board.
2.Detach the RTC battery 2 from the base enclosure and release the RTC battery as far as the RTC battery cable allows. (The RTC battery is attached to the base enclosure with
3. Remove the RTC battery.
Reverse this procedure to install the RTC battery.