Removal and replacement procedures
Right speaker
Description | Spare part number |
|
|
Speaker assembly (includes left and right speakers and speaker cables) | |
|
|
Before removing the right speaker, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page 7).
5.Remove the following components:
a.Hard drive cover (see “Hard drive” on page 8)
b.Keyboard (see “Keyboard” on page 22)
c.Keyboard cover (see “Keyboard cover” on page 24).
Remove the right speaker:
1.Disconnect the right speaker cable 1 from the system board.
2.Release the speaker cables from the clips 2 and routing channels built into the top cover.
3.Remove the Phillips PM2.0×4.0 screw 3 that secures the right speaker to the top cover.
4.Remove the right speaker 4.
Reverse this procedure to install the right speaker.