HP CQ36-103TX, CQ36-108TX, CQ36-109TX, CQ36-106TX, CQ36-104TX Removal and replacement procedures

Removal and replacement procedures

2.Turn the computer display-side up with the front toward you.

3.Open the computer as far as possible.

4.Lift the rear edge 1 of the keyboard until it rests at an angle.

5.Slide the keyboard 2 toward the display until the tabs on the front edge of the keyboard are clear of the openings in the top cover.

6.Swing the rear edge of the keyboard 3 up and forward until it rests upside down on the top cover.

7.Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and then disconnect the keyboard cable 2 from the system board.

8. Remove the keyboard.

Reverse this procedure to install the keyboard.

4–23