HP ew2500 802.11b/g Print Server manual Test button functions, 1Test button instructions

Page 11

Test button functions

The test button, which is located on the back of the HP Jetdirect ew2500 print server, provides various functions depending on the number of the times the button is pressed. These functions can be useful during the installation process.

NOTE: Typically, you press the button the indicated number of times in quick succession. However, some options provide additional functionality when holding the last button press.

Table 1-1Test button instructions

Button Presses

Function

Instructions and Status Light (if applicable)

 

 

 

1

Print an HP Jetdirect configuration

Changes to blinking green for approximately five seconds.

 

page.

 

 

 

 

2

Print an HP Jetdirect security page.

 

 

 

 

3

Print an HP Jetdirect configuration

On the third press, hold the button down until the status light begins

 

page in English, French, Italian,

blinking, and then release the button. The configuration page prints

 

German, or Spanish.

in all languages.

4Print an HP Jetdirect wireless status page.

5Change the LAN speed/handshake. On the fifth press, hold the button down until the status light begins

 

This is only for switches that do not

blinking, then release the button.

 

have auto negotiation mode set,

Select from the following speed/handshake combinations (displayed

 

 

 

Select from the following speeds/

three times):

 

handshake: 10 Mbps. half-duplex, 10

Blinking amber — 10 half-duplex

 

Mbps. full-duplex, 100 Mbps. half-

 

duplex, or 100 Mbps. full-duplex.

Solid amber — 10 full-duplex

 

 

 

 

Blinking green — 100 half-duplex

 

 

Solid green — 100 full-duplex

 

 

To select a speed/handshake:

 

 

1.

Press and release the test button when the color associated with

 

 

 

the speed/handshake you want is displayed. (The test button

 

 

 

turns off then displays the selected color.)

 

 

2.

If the speed is correct (indicated by the test button color), press

 

 

 

and release the test button once to confirm.

 

 

3.

If the speed/handshake is not correct (indicated by the test

 

 

 

button color), do not press the test button. The change is not

 

 

 

made. You can then start over and change the speed/

 

 

 

handshake.

 

 

4.

To complete (save) the change, power cycle the print server.

 

 

 

6

Reset 802.1x to factory default

To complete (save) the change, power cycle the print server.

 

values.

 

 

 

 

 

7

Disable IPsec.

To complete (save) the change, power cycle the print server.

 

 

 

 

ENWW

Test button functions 3

Image 11
Contents HP Jetdirect ew2500 802.11g Wireless Print Server Page HP Jetdirect ew2500 802.11g Wireless Print Server Copyright Hewlett-Packard Development Company, L.P Table of contents Install the printer on a network system or server Appendix D Regulatory statements Enww Whats in the box IntroductionWhat you need to supply 1Test button instructions Test button functionsAccess Point Wireless LAN terms and conceptsChannels Ad Hoc peer-to-peer modeEncryption Infrastructure modeSecurity type Client-server printing Service Set Identifiers SsidSignal range Network printing terms and conceptsNetwork address Peer-to-peer direct mode printingIf you need help Network protocolsEnww If the printer is not already set up Install the print server hardwareSet up the printer If the printer is already set upProceed to Make a network connection on Make a network connection Configure a wireless network using the network LAN cableEnww Enww Enww Configure settings for a wired network Enww Configure a wireless network without a network LAN cable Factory-default wireless settings 1Factory default wireless settings Optional wireless connection setup methodsEnww Install the printer on a network system or server Install the printer on a network system or server Microsoft networks Microsoft client-server networks To view documents on the CD-ROM Reset the print server to factory defaults cold reset TroubleshootingInterpret the status lights Light State Color Description After initial setup Unable to communicate with the print server wirelessDuring initial setup Improve reception and performance My configured channel does not match the configurationTry these actions Firmware download failureHewlett-Packard limited warranty statement Service and supportYour authorized dealer Service billing out of warrantyCustomer support Local warranty statementsProduct accessibility HP support software Solution summaryEmbedded services SSL/TLS Supported network protocolsDLC/LLC Electrical power adapter SpecificationsAcoustic EnvironmentalElectromagnetic HP subassemblies Radio characteristicsSafety Wireless telecommunicationsFCC statement Regulatory statementsRRL statement Korea Regulatory Model Identification NumberCanada Vcci JapanExposure to radio frequency radiation Regulatory wireless statementsContact for European regulatory topics European Union regulatory noticeEnww Enww Page Hewlett-Packard Development Company, L.P
Related manuals
Manual 206 pages 49.02 Kb

ew2500 802.11b/g Print Server specifications

The HP ew2500 802.11b/g Print Server is a versatile printing solution designed to streamline the printing process within a wireless network environment. Specifically geared towards small to medium-sized offices, this print server provides seamless integration for various printers and enhances accessibility across multiple devices.

One of the main features of the HP ew2500 is its adherence to the 802.11b/g wireless standards, offering high-speed wireless connectivity with a maximum data rate of up to 54 Mbps. This ensures efficient data transmission, allowing users to print from anywhere within the wireless range without the hassle of tangled cables or limited port access. The print server supports both infrastructure and ad-hoc wireless networking modes, making it flexible for diverse networking environments.

Another notable characteristic of the ew2500 is its compatibility with various printer types, including inkjet, laser, and all-in-one printers. This compatibility is essential for organizations that utilize different printer brands and models, facilitating a centralized printing solution. Additionally, the server is equipped with an Ethernet port, providing the option for wired connectivity, which can be beneficial for situations where wireless performance might be compromised.

The HP ew2500 is designed with user-friendly features. The easy setup process allows users to configure the server using a straightforward web interface, which can be accessed from any network-enabled device. This simplicity reduces the time required for installation and eliminates the need for extensive technical knowledge.

Security is another critical aspect of the HP ew2500's functionality. The print server supports robust encryption protocols, including WEP and WPA, ensuring that data transmitted over the network remains secure from unauthorized access. This feature is particularly important in office environments where sensitive information may be printed frequently.

Overall, the HP ew2500 802.11b/g Print Server is an efficient and reliable solution for enabling wireless printing capabilities in a business setting. Its combination of high-speed wireless connectivity, broad printer compatibility, user-friendly setup, and essential security features makes it an excellent choice for organizations looking to enhance their printing infrastructure. Whether in an office or a home environment, the ew2500 provides the functionality and convenience necessary to meet modern printing demands efficiently.