HP ew2500 802.11b/g Print Server manual Interpret the status lights

Page 37

CAUTION: Resetting the HP Jetdirect wireless print server to factory-default settings can cause the print server to lose its wireless connection to your network. Reconfiguration of wireless network settings and reinstallation of the print server might be required.

If a printer reset is required, settings are reset to their factory default values. If you reset the printer, you might need to reconfigure the printer’s settings that are required by users.

To restore factory-default settings on an HP Jetdirect ew2500 print server, follow these steps:

1.Unplug the power module from the back of the print server.

2.While holding down the test button on the back of the print server, plug the power module back into the print server then release the test button. Any user-configured settings will be erased.

When you restore the print server to its factory-default settings, you should print an HP Jetdirect configuration page to confirm that factory-default values have been assigned.

Interpret the status lights

The HP Jetdirect ew2500 status lights provide information about the USB, wired, and wireless connections. The Link and Act status lights on the LAN connector indicate network activity.

1	USB

2	Wired

3	Wireless

4	Link (on LAN connector)

5	Act (on LAN connector)

ENWW	Interpret the status lights 29

Image 37

Contents HP Jetdirect ew2500 802.11g Wireless Print Server Page HP Jetdirect ew2500 802.11g Wireless Print Server Copyright Hewlett-Packard Development Company, L.P Table of contents Install the printer on a network system or server Appendix D Regulatory statements Enww Whats in the box IntroductionWhat you need to supply 1Test button instructions Test button functionsAccess Point Wireless LAN terms and conceptsChannels Ad Hoc peer-to-peer modeEncryption Infrastructure modeSecurity type Signal range Service Set Identifiers SsidNetwork printing terms and concepts Client-server printingIf you need help Peer-to-peer direct mode printingNetwork protocols Network addressEnww Set up the printer Install the print server hardwareIf the printer is already set up If the printer is not already set upProceed to Make a network connection on Make a network connection Configure a wireless network using the network LAN cableEnww Enww Enww Configure settings for a wired network Enww Configure a wireless network without a network LAN cable Factory-default wireless settings 1Factory default wireless settings Optional wireless connection setup methodsEnww Install the printer on a network system or server Install the printer on a network system or server Microsoft networks Microsoft client-server networks To view documents on the CD-ROM Reset the print server to factory defaults cold reset TroubleshootingInterpret the status lights Light State Color Description During initial setup Unable to communicate with the print server wirelessAfter initial setup Improve reception and performance My configured channel does not match the configurationTry these actions Firmware download failureHewlett-Packard limited warranty statement Service and supportYour authorized dealer Service billing out of warrantyProduct accessibility Local warranty statementsCustomer support Embedded services Solution summaryHP support software SSL/TLS Supported network protocolsDLC/LLC Electrical power adapter SpecificationsElectromagnetic EnvironmentalAcoustic Safety Radio characteristicsWireless telecommunications HP subassembliesFCC statement Regulatory statementsCanada Regulatory Model Identification NumberVcci Japan RRL statement KoreaExposure to radio frequency radiation Regulatory wireless statementsContact for European regulatory topics European Union regulatory noticeEnww Enww Page Hewlett-Packard Development Company, L.P

Related manuals

Manual 206 pages 49.02 Kb