HP ew2500 802.11b/g Print Server manual Install the print server hardware, Set up the printer

Page 19

2 Install the print server hardware

Set up the printer

NOTE: Do not install any printer software until all of the hardware connection steps have been completed.

If the printer is already set up

1.Turn off the printer.

2.Detach it from any computer.

3.Turn on the printer.

4.Proceed to Connect the print server to the printer on page 11.

If the printer is not already set up

1.Assemble the hardware only using the instructions supplied with the printer.

2.Set aside the printer CD. (Do not install its software yet. Do not attach the printer to your computer.)

3.Turn on the printer.

4.Print a test page as instructed.

Connect the print server to the printer

1.Connect the USB cable.

●Plug the supplied USB cable into the USB connector on the back of the print server.

●Plug the other end of the cable into the printer’s USB connector.

CAUTION: Do not use a USB hub, extender or parallel converter.

ENWW	Set up the printer 11

Image 19

Contents HP Jetdirect ew2500 802.11g Wireless Print Server Page HP Jetdirect ew2500 802.11g Wireless Print Server Copyright Hewlett-Packard Development Company, L.P Table of contents Install the printer on a network system or server Appendix D Regulatory statements Enww Whats in the box IntroductionWhat you need to supply 1Test button instructions Test button functionsAccess Point Wireless LAN terms and conceptsChannels Ad Hoc peer-to-peer modeEncryption Infrastructure modeSecurity type Client-server printing Service Set Identifiers Ssid Signal range Network printing terms and conceptsNetwork address Peer-to-peer direct mode printingIf you need help Network protocolsEnww If the printer is not already set up Install the print server hardwareSet up the printer If the printer is already set upProceed to Make a network connection on Make a network connection Configure a wireless network using the network LAN cableEnww Enww Enww Configure settings for a wired network Enww Configure a wireless network without a network LAN cable Factory-default wireless settings 1Factory default wireless settings Optional wireless connection setup methodsEnww Install the printer on a network system or server Install the printer on a network system or server Microsoft networks Microsoft client-server networks To view documents on the CD-ROM Reset the print server to factory defaults cold reset TroubleshootingInterpret the status lights Light State Color Description During initial setup Unable to communicate with the print server wirelessAfter initial setup Improve reception and performance My configured channel does not match the configurationTry these actions Firmware download failureHewlett-Packard limited warranty statement Service and supportYour authorized dealer Service billing out of warrantyProduct accessibility Local warranty statementsCustomer support Embedded services Solution summaryHP support software SSL/TLS Supported network protocolsDLC/LLC Electrical power adapter SpecificationsElectromagnetic EnvironmentalAcoustic HP subassemblies Radio characteristicsSafety Wireless telecommunicationsFCC statement Regulatory statementsRRL statement Korea Regulatory Model Identification NumberCanada Vcci JapanExposure to radio frequency radiation Regulatory wireless statementsContact for European regulatory topics European Union regulatory noticeEnww Enww Page Hewlett-Packard Development Company, L.P

Related manuals

Manual 206 pages 49.02 Kb