Known Problems
•EISA 100BT Warning Message
When you remove an EISA 100BT product from a system or update a system having EISA 100BT to any later releases of HP-UX, you may find the following message in the
/var/adm/sw/swagent.log file:
Running remove setup command /usr/lbin/sw/remove_setup. /dev/diag/ether* not found.
This behavior occurs in the HP-UX 10.20, HP-UX 11.0, and HP-UX 11i (B.11.11) versions of this product. Presence or absence of this file on a system will not have any impact on this product. You may safely ignore this message.
•Patch Needed Before Installing Fibre Channel Adaptor
Before you migrate to HP-UX 11i, make sure that PHKL_23626 (or later) is included in your installation. Download HP-UX patches from the HP IT Resource Center. See “Web Resources” on page 21.
