HP ux 11.0 manual

Page 8

HP-UX 11.00. Critical patches found previously in the HWCR bundle are now available in the Quality Pack (QPK) bundle.

As of the September 2001 release, the General Release (GR) bundle on the Support Plus CD has been consolidated with a new Quality Pack (QPK) bundle, combining the best features of both. GR bundle users should now use the QPK bundle, located in the QPK1100 directory.

For new user documentation, this new booklet replaces the document delivered with the previous November 1999 ACE bundle release and the December 2000 release. This new book replaces all earlier HP-UX 11.0 Readme documents.

New Fibre Channel, HyperFabric, and PCI RS-232 MUX drivers have been added to support new mass-storage and network cards.

The following table lists some selectable drivers. For more drivers, see the Selectable Drivers table in Chapter 1 of the HP-UX 11.0 Installation and Update Guide.

Newer mass storage cards may require system firmware upgrades before connecting to boot devices. For the latest supported firmware for your system, go to the web:

http://software.hp.com/SUPPORT_PLUS/info.html

8

Image 8
Contents Read before installing or updating to hp-ux Warranty Contents Welcome to HP-UX Media Box Contents Support Plus CD HP-UX Instant Information CD IicdGeneral Features in HP-UX Page Selectable Drivers HP-UX 11.0 Selectable Drivers HardwareSelectable Drivers Selectable Drivers Page Migration Overview Cold Install Basic Configuration Choices Menu OptionsPage Page Software Selection Eisa 100BT Warning Message Known ProblemsPatch Needed Before Installing Fibre Channel Adaptor Screen May Lock During Update Cold Installing over a Network?Installing 64-bit Minimal OS Web Resources Page Wapservers.html