HP ux 11.0 manual Installing 64-bit Minimal OS

Page 20

For the drivers supplied on the HP-UX 11.0 CD, see "Meet- ing System Requirements" in Chapter 1 of the HP-UX 11.0 Installation and Update Guide.

Booting from a boot device connected via a Fibre Channel fabric switch is not supported. Connect the boot device directly to the system using one of the available Fibre Chan- nel cards listed in “Selectable Drivers” on page 9.

•Installing 64-bit Minimal OS

You can now cold install the HP-UX 11.0 64-bit Minimal OS (bundle name HPUXMinSys32/64)from the Install/Update/ Recovery CD without a problem. If you plan to install HPUXMinSys32/64 via an Ignite-UX server, however, you will need to first edit manually the config file produced by make_config for the Core OS depot. In the config file, search for this line:

sd_software_list="HPUXMinSys64,r=B.11.00,a=HP UX_B.11.00_64,v=HP"

Change it to the following:

sd_software_list="HPUXMinSys64 ProgSupport.C- INC"

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Read before installing or updating to hp-ux Warranty Contents Welcome to HP-UX Media Box Contents Support Plus CD HP-UX Instant Information CD IicdGeneral Features in HP-UX Page Selectable Drivers HP-UX 11.0 Selectable Drivers HardwareSelectable Drivers Selectable Drivers Page Migration Overview Cold Install Basic Configuration Choices Menu OptionsPage Page Software Selection Eisa 100BT Warning Message Known ProblemsPatch Needed Before Installing Fibre Channel Adaptor Screen May Lock During Update Cold Installing over a Network?Installing 64-bit Minimal OS Web Resources Page Wapservers.html
Top Page Image Contents