HP UX 11i v3 manual AD355A Technical Specifications, Table B-2

Page 38

AD355A Technical Specifications

Table B-2

Performance Characteristics

Characteristics

Bus Interface

PCI Express x4

PCI Express Lane Speed

2.5 Gb/s

Connectivity

Dual port Fibre Channel, multi-mode short-wave optical link

Link Speed

4 Gbps / 2 Gbps / 1 Gbps

Link Distance

4 Gbps : 150m; 2 Gbps : 300m; 1 Gbps : 500m. Over K50/125um multi-mode fiber

 

optic cable

Connector

Two LC Duplex Connectors

Physical

 

Length

168 mm (6.61 inches)

Width

68 mm (2.713 inches)

Height

9.9 mm (0.39 inches)

Weight

102 g (3.6 Oz)

Electrical

7.5 watts (normal), 10 watts (max)

Standards

Complies with ANSI standards (ANSI X3T11) for standard Fibre Channel, PCIe

 

Base specfication Rev 1.0a, and PCIe Electrical/Mechanical spec 1.1

Environmental

 

Temperature

+5 to +40 degrees C (+41 to +104 F) operating; -40 to +70 degrees C (-40 to +177 F)

 

non operating

Relative Humidity

5% to 90% @ 65 degrees C (149 degrees F) non-condensing, non-operating; 20% to

 

80% @ 40 degrees C (104 degrees F) non-condensing, operating

Altitude

4.5 km (15,000 ft)

Electromagnetic

 

USA

FCC Class A

Europe

CISPR-22 Class A

Germany

FTZ-1046 (VDE Level B)

Japan

VCCI Class I

Laser Safety

Class 1

38 Technical Specifications

Image 38
Contents HP-UX 11i v2 and 11i Copyright 2008 Hewlett Packard Development Company L.P Table of Contents Technical Specifications List of Figures Page List of Tables Page List of Examples Page Adapter Overview HP Fibre Channel Mass Storage OverviewPage Prerequisites Fibre Channel Adapter InstallationInstalling Driver Software Fibre Channel Adapter Bundle and Product NamesInstalling Adapter Hardware Select Mark for Install from the Actions menuInstalling the Fibre Channel Adapter Cable Products Verifying the Fibre Channel Adapter InstallationAttaching the Adapter to Other Fibre Channel Devices Sample ioscan outputVerifying Connectivity # insf -e # ioscan -fExample 2-2 Hardware Path for a Private Loop Device Interpreting Hardware PathsExample 2-1 Hardware Path for a Direct Fabric Attach Device Hardware Path Field DescriptionsLUN Page Introduction Troubleshooting and MaintenanceObtaining Card Information after Installation Adapter LED StatesExample of Vital Product Data VPD after installation Example of ioscan entry after installationDevice HP MSA Volume HP Support Tools ManagerSupported Products Event Monitoring ServiceFibre Channel Adapter Monitor Offline Diagnostics Environment ODE Installing and Configuring Support Tools Manager and EMSDiagnostic Flowcharts Flowchart 1 Configuration TestFlowchart 1 Configuration Test Procedures Flowchart 2 Fibre Channel Connections Test Fibre Channel Connections TestFlowchart 2 Connections Test Procedures Firmware Updates Fibre Channel Host Bus Adapter Online Firmware UpdatesModifying the Scanning Policy Troubleshooting and Maintenance Regulatory Statements Regulatory StatementsCertification and Classification Information Laser Safety StatementsVcci Statement Japan Product InformationLaser Safety Finland Laserturvallisuus Laserturvallisuus Luokan 1 Laserlaite Klass 1 Laser ApparatPage Table B-1 Technical SpecificationsAD299A Technical Specifications AD355A Technical Specifications Table B-2Index