1 Connecting to a Netware 3.12 Server
Windows for Workgroups Version 3.11
7Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt.
8Insert Netware Client for DOS and Windows Disk 1 and execute “A:\INSTALL.”
9Change the settings to match the following and then option 6 to continue the installation.
•C:\NWCLIENT
•YES
•YES
•C:\WINDOWS
•No
•Intel EtherExpress ™ Pro/10 LAN Adapter (Use the driver from the driv- ers disk at A:\)
10Insert the corresponding diskettes to finish the file transfer, and then reboot the machine.
11After windows loads, open the “NETWORK” folder, and
12Select the “Networks” button in the “Network Setup” and verify that “Novell NetWare (Workstation Shell 4.0 and above)” is listed under “Install Windows Support for the following network only:”
13Click on “OK” twice to complete the installation.