HP Docking System manual ISA cards PCI card

Page 24

Important News for

Windows 95 Users

Using the Docking System

Making Connections

4.Unscrew and remove the slot cover next to the card slot you want to use.

5.Slide the card firmly into the connector and replace the slot cover screw.

Important If you have already installed a PCI card, you can install only one ISA card—and it must be in the lower ISA slot.

ISA cards

PCI card

6.Replace the shield.

7.Plug in the ac adapter.

8.Replace the cable cover and dock the OmniBook.

9.If you’re using Windows for Workgroups.

Install the software for the card following the manufacturer’s instructions. If the card isn’t detected, contact the card manufacturer.

–or–

If you’re using Windows 95

If the card isn’t detected, in Control Panel double-click Add New Hardware.

If you are using Windows 95, you’ll need to remove the card you added from the undocked configuration. See the following procedure.

1-24

Image 24

Contents HP OmniBook Docking System User’s Guide Edition History Contents Page Using the Docking System Getting Started How to Use This manual About Your OmniBook ManualsTo set up the docking system Understanding the BasicsWarranty invalid To dock the OmniBook Tilt footTo undock the OmniBook To set a docking password Other ControlsTo manually undock the OmniBook To attach a security cable To understand docking status lights Making Connections To connect an external keyboard To connect a PS/2 mouseSerial connector To connect a serial mouseTo switch back to the internal pointing device To connect an external displayTo enable the built-in and external displays Simultaneously To connect a parallel deviceHeadphones or external speakers To connect a serial deviceTo connect your audio equipment To connect Scsi devices Microphone or external audio source such as a CD playerTo install an expansion card ISA cards PCI card To remove a device from the undocked configuration Confirm Device RemovalPage Troubleshooting Troubleshooting Solving Problems If you’re using Windows 95 and OmniBook won’t undock If you need to replace a lost or damaged power cordIf an external PS/2 mouse or keyboard doesn’t work If the network connections don’t workIf a network-enabled system locks up when rebooting If Scsi devices don’t workIf your docking password isn’t accepted Specifications and Regulatory Information To contact Hewlett-Packard Regulatory Information Canada JapanEurope EMC