Switch Power on to Peripherals, then to the Computer
Before applying power to your system, follow these guidelines:
1.Verify all cables are connected and securely fastened.
2.Switch power on to your peripheral devices and wait for them to become ready before you switch power on to your computer.
3.Switch power on for your computer.
When the computer’s power is switched on, power is supplied to the SCSIadapter. The SCSI adapter supplies termination power to the SCSIbus. Someperipheral devices may also supply SCSIbus termination power.
CAUTION | Do not switch power on or off on any device connected to an |
| active SCSI bus. Similarly, devices should not be added to, or |
| removed from, an active SCSI bus. Failure to comply may |
| result in data corruption or loss, or damage to hardware. |