HP 3Com 3C905B D7522A, 3Com 3C905B D7523A manual Manageability and DMI

HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide

Installation Requirements

In order to operate the Remote Wake-Up and Remote Power-On features correctly, the network card needs to interact with the power management solution used by your PC and operating system. Generally, recent PCs will support two different implementations of power management, APM and ACPI. Your network interface card will work with either power management solution but support for Remote Wake-Up and Remote Power-On is dependent on the operating system and, in some cases, the version of the operating system you are using.

Operating	Power Management	Remote Wake-Up		Remote Power-On
System	Solution		Support	Support
Windows 95	APM	Yes		Yes
Windows 98	APM	Yes		Yes
	ACPI	No		Yes
Windows 98	APM	Not Supported		Not Supported
Second Edition
	ACPI	Yes	1	No
Windows NT 4.0	None	No Standby Mode		Yes

1.By default, Remote Wake-Up is disabled.

Manageability and DMI

The DMI Component Code for your network interface card enables DMI instrumentation for asset management, local and remote client administration. This means that your card’s configuration status can be viewed and modified using a standard DMI browser such as HP TopTools.

For more information and to download the DMI Component Code for your network card, go to the following HP web site:

www.hp.com/go/toptools

English 5