HP 3Com 3C905B D7522A, 3Com 3C905B D7523A manual Overview of the Installation Procedure

HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide

Overview of the Installation Procedure

Non-Supported Network Drivers

The following network drivers are provided on the

EtherDisk® diskettes but are not supported by HP:

Network Operating System	Network Driver Name
Banyan VINES	EL90X.DOS
Artisoft LANtastic	EL90X.DOS
IBM LAN SERVER (DOS)	EL90X.DOS
IBM LAN SERVER (OS/2)	EL90X.OS2
DEC PATHWORKS	EL90X.DOS (DOS) and
	3C90X.COM (Netware)

Overview of the Installation Procedure

CAUTION Your PC and network interface card can be permanently damaged by static electricity. Before handling the card, touch the unpainted part of your PC’s metal chassis. Maintain grounding by wearing a wrist strap attached to the chassis. Handle the card by its backplate and top edge. Do not touch the edge connector.

Installing the 3C905C-TX NIC is a 4-step process. You need to:

•Install the card in your PC.

•Connect the card to the network.

•Update LAN-specific fields in the HP PC Setup utility.

•Install the driver software.

After you complete the installation, you can use the NIC Doctor software to troubleshoot any problems.

English 7