Troubleshooting
Expansion Cards
For more information on expansion cards, refer to Chapter 7, “Expansion Cards.”
Problem | Solution | |
|
| |
I cannot get my | ■ Be sure you have inserted the appropriate card into the | |
HP iPAQ | appropriate slot. | |
to recognize the | ■ Be sure you have firmly pushed the expansion card | |
expansion card. | ||
down into the card slot of the HP iPAQ. | ||
| ||
| ■ Be sure you have installed the drivers that came with | |
| the expansion card. | |
|
| |
I cannot insert | ■ Be sure the label is facing the front of the HP iPAQ. | |
my card. | ■ Be sure you are not inserting the card at an angle. | |
| ||
| ■ Be sure you have inserted the connection area first. | |
|
| |
I cannot remove | To release the locking mechanism, you must first push in the | |
my SD card. | SD card. The card pops out slightly and is then easily | |
| removed. | |
|
| |
My HP iPAQ | ■ Be sure you have installed the drivers that came with | |
cannot | the expansion card you purchased. | |
recognize | ■ Perform a normal reset of the HP iPAQ by using the | |
my card. | ||
stylus to briefly press the Reset button. | ||
| ||
|
|
User’s Guide |