4.Remove the seven Phillips PM2.5×6.0 screws in the battery bay and the hard drive bay that secure the top cover to the computer.
5.Remove the two Phillips PM2.5×9.0 screws (1) and the three Phillips PM2.0×3.0 screws (2) in the battery bay that secure the top cover to the computer.
6.Turn the computer
7.Open the computer.
8.Release the ZIF connectors to which the following cables are attached, and then disconnect the cables from the system board:
●Power button board cable (1) (included with the power button board spare part kit, spare part number
●TouchPad button board cable (2) (included with the TouchPad button board spare part kit, spare part number
●TouchPad cable (3) (included in the Cable Kit, spare part number
Component replacement procedures 53