HP 2000, D1E80UA manual Fan/heat sink assembly

3.Detach the RTC battery (2) from the system board. (The RTC battery is attached to the system board with double-sided tape.)

4.Remove the RTC battery.

Reverse this procedure to install the RTC battery.

Fan/heat sink assembly

NOTE: The fan/heat sink assembly spare part kit includes replacement thermal material. Replacement thermal material is also available in the Thermal Material Kit, spare part numbers 650277-001 (for use only with computer models equipped with an AMD processor) and 646135-001 (for use only with computer models equipped with an Intel processor).

Description	Spare part number
For use only with computer models equipped with an AMD processor	647316-001
For use only with computer models equipped with an Intel Core i5 or i3 processor and a graphics	646182-001
subsystem with discrete video memory
For use only with computer models equipped with an Intel Core i5 or i3 processor and a graphics	646183-001
subsystem with UMA video memory
For use only with computer models equipped with an Intel Pentium processor and a graphics	646180-001
subsystem with discrete video memory
For use only with computer models equipped with an Intel Pentium processor and a graphics	646181-001
subsystem with UMA video memory
For use only with computer models equipped with an Intel Celeron processor and a graphics	646184-001
subsystem with UMA video memory

Component replacement procedures 73