6.Open the computer.
7.Remove the two Phillips PM2.5×6.0 screws (1) that secure the power connector and bracket to the computer.
8.Remove the power connector bracket (2).
9.Remove the power connector (3).
Reverse this procedure to install the power connector cable.
Speakers
Description | Spare part number |
|
|
Speaker Kit (includes left and right speakers and cable) | |
|
|
Before removing the speakers, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 39), and then remove the following components:
●Optical drive (see Optical drive (select models only) on page 40)
●Keyboard (see Keyboard on page 49)
●Top cover (see Top cover on page 51)
●USB board (see USB board on page 58)
60 Chapter 4 Removal and replacement procedures