HP 2000, D1E80UA manual

●WLAN module (see WLAN module on page 43)

●Keyboard (see Keyboard on page 49)

●Top cover (see Top cover on page 51)

●System board (see System board on page 69)

●Fan and heat sink (see Fan/heat sink assembly on page 73) Remove the processor:

1.Use a flat-bladed screw driver to turn the processor locking screw one-half turn counterclockwise (1), until you hear a click.

2.Lift the processor (2) straight up, and then remove it.

NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed on the processor socket when you install the processor.

Reverse this procedure to install the processor.

Component replacement procedures 81