4.Remove the display assembly (4).
5.If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.Remove the two screw covers (1) and the two Phillips M2.5×6.0 screws (2) that secure the display bezel to the display assembly. The screw covers are available in the Display Screw Kit, spare part number
b.Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure.
76 Chapter 4 Removal and replacement procedures